Samba-1.9.16p2-VMS-4						1-Nov-1996


Location: ftp://ftp.ifn.ing.tu-bs.de/vms/samba
Info: http://www.ifn.ing.tu-bs.de/ifn/sonst/samba-vms.html

This is SAMBA for VMS. Ported to VMS by Eckart Meyer <meyer@ifn.ing.tu-bs.de>
Executables for VAX and Alpha of the UNZIP program can be found one
directory up. Read the file README.VMS.

=====================================
This software is still alpha test. It has not been widely
tested until now. It currently runs with UCX or UCX emulation.
=====================================
V1.9.16p2-VMS4 has only changes in the command procedues.
Binaries are the same than in V1.9.16p2-VMS2.
=========================================================

	The main purpose of this update is to support MultiNet and
	TCPware.

	Since there are only few changes from -VMS2 (and -VMS3) to -VMS4, an
	update archive is provided. This archive simply contains the
	updated .COM and text files. For the binary distribution, extract
	the files into the sambe directory where the -VMS2 version has
	been extracted. For the source distribution, extract to the [.VMS]
	directory.

UPDATE_VMS2_AND_VMS3_TO_VMS4.ZIP

	The updated files.

SAMBA-1_9_16P2-VMS4.ZIP

	The full original samba kit with VMS changes. Use this archive
	to build SAMBA for VMS from source.

SAMBA-1_9_16P2-VMS4-BIN_ALPHA_UCX.ZIP
SAMBA-1_9_16P2-VMS4-BIN_VAX_UCX.ZIP

	Binaries for VMS V6 and higher with UCX V3.3 and higher.
	Plus all documentation and examples.
	Extract to an empty directory and type @LINK and @INSTALL.
	(earlier VMS VAX system	like V5.5-2 can install AACRT060.A to
	provide a DEC-C V6 environment. Samba should then run those systems).

Eckart Meyer