  PATHWORKS and PC password validation? 
 The Question is:
 
VMS VER - V5.5-2H4, Pathworks Version 5, running on a MVAX 3100-90
This is going to be a bit lengthy but would appreciate any assistance that
you can afford.
 
We currently have the following - Approx 40PC's, 50 User Pathworks Lic.,
Unlimited VMS License. The problem is as follows. There is a situation that
is created when a PC is connected that seems to render 3 seperate PC's inop.
When any one of these 4 PC's
is connected no one else can get password validation. I can connect to an NT
Server by changing the domain name on the windows logon screen and have no
problems but as soon as I try to validate on the VAX Domain no can do. Only
1 PC out of the 4. Oddly en
ough I have configured an additional 2 PCs of exact same hardware and
software that do not fall into this category and do not suffer this problem
at all. All PC's are running WIN95 and to my knowledge nothing has changed
recently to create this problem (I
 bet you've heard that one about a zillion times before). I have tried to
re-install all the network components on the PC but to no avail. I have also
done a full Autogen and cleared down all the licenses, although as I
mentioned any other PC can log in w
ithout licensing problems. Sorry for the lengthy letter. Awaiting, with
thanks in advance, for your reply if possible (Grovel Grovel)
 
Martin Wellington.......
 
 
 
 The Answer is:
 
  Please contact the customer support center for assistance.
