H                                                            AA-X571B-TE
 
 
 
 
 
 
 
*                              VAX DECspell
+                              VAX DECspell
  
2                     System and Installation Guide
3                     System and Installation Guide
  
 
 
 
)                              Version 1.1
 *                              Version 1.1
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2                     DIGITAL EQUIPMENT CORPORATION
3                     DIGITAL EQUIPMENT CORPORATION
 /                         Maynard, Massachusetts
 0                         Maynard, Massachusetts
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
%                                   1
   G                                                           AA-X571B-TE
 G                                        First Printing, September 1983
 Q                                          Revised Printing, March 1985          
  
H The information in this document is subject to change  without  notice
H and  should  not  be  construed  as  a commitment by Digital Equipment
H Corporation.  Digital Equipment Corporation assumes no  responsibility
2 for any errors that may appear in this document.
 
H The software described in this document is furnished under  a  license
G and may used or copied only in accordance with terms of such license.
  
H No responsibility is  assumed  for  the  use  or  reliability  of  its
H software  on  equipment  that  is  not  supplied  by Digital Equipment
* Corporation or its affiliated companies.
 
H Copyright (c) Digital Equipment Corporation 1983,  1985.   All  rights
 reserved.
  
@ The following are trademarks of Digital Equipment Corporation:
 
 +-+-+-+-+-+-+-+
  |D|I|G|I|T|A|L|
  +-+-+-+-+-+-+-+
  
6 ALL-IN-1           DECwriter                    RSTS
5 DEC                DIBOL                        RSX
 8 DECmate            MASSBUS                      UNIBUS
5 DECspell           PDP                          VAX
 5 DECsystem-10       P/OS                         VMS
 4 DECSYSTEM-20       Professional                 VT
@ DECTAPE II         Rainbow                      Work Processor
 DECUS
  
H The software described in this  manual  is  in  part  subject  to  the
 following copyright:
 
H Houghton Mifflin Spelling Verification  -  Correction,  (c)  Copyright
E 1983, 1981 Houghton Mifflin Company.  All rights strictly reserved.
  
H The spelling correction software contains unpublished materials  owned
H by  Houghton  Mifflin  Company,  licensed  for  use  solely in Digital
H software.  Reproductions or disassembly of embodied computer  programs
G or algorithms prohibited.  Based on The American Heritage Dictionary.
  
 
 
 
 
 
 
 
 
 
 
 
 
&                                   ii
  -                                    CONTENTS
  
 
 
/ CHAPTER 1       INTRODUCTION AND REQUIREMENTS
  
H         1.1     Introduction . . . . . . . . . . . . . . . . . . . 1-1
H         1.2     Hardware Requirements  . . . . . . . . . . . . . . 1-1
H         1.3     Software Requirements  . . . . . . . . . . . . . . 1-1
H         1.4     The Kit  . . . . . . . . . . . . . . . . . . . . . 1-3
 
 
. CHAPTER 2       PREPARATION AND INSTALLATION
 
H         2.1     Preparing for Installation . . . . . . . . . . . . 2-1
H         2.2     Installing DECspell  . . . . . . . . . . . . . . . 2-3
 
 
* CHAPTER 3       ADVICE ON USING DECSPELL
 
H         3.1     Personal Dictionaries  . . . . . . . . . . . . . . 3-1
H         3.1.1     Using DECspell for the First Time  . . . . . . . 3-1
H         3.1.1.1     Using DECspell Outside ALL-IN-1 V2 . . . . . . 3-1
H         3.1.1.2     Using DECspell from ALL-IN-1 V2  . . . . . . . 3-2
H         3.1.2     Using Imported Dictionaries in ALL-IN-1 V2 . . . 3-2
H         3.1.3     Sharing Personal Dictionaries with Other Users . 3-3
=         3.1.4     System Messages Associated with Personal 
 H                   Dictionaries . . . . . . . . . . . . . . . . . . 3-3
H         3.1.5     Words in Dictionaries  . . . . . . . . . . . . . 3-4
H         3.2     The HELP Key . . . . . . . . . . . . . . . . . . . 3-4
H         3.3     RUNOFF Documents in ALL-IN-1 . . . . . . . . . . . 3-4
H         3.4     DCL Command Qualifiers . . . . . . . . . . . . . . 3-5
H         3.4.1     Tailoring Command Qualifiers . . . . . . . . . . 3-7
H         3.5     Finding the Version Number . . . . . . . . . . . . 3-7
 
 
 CHAPTER 4       SYSTEM TUNING
  
 
 CHAPTER 5       RELEASE NOTES
  
H         5.1     Differences Between DECspell V1.1 and V1.0 . . . . 5-1
H         5.2     Software Problems Fixed by this Release  . . . . . 5-1
H         5.2.1     Message Numbers Appearing on the Screen  . . . . 5-1
H         5.2.2     Lost Output Files  . . . . . . . . . . . . . . . 5-2
H         5.3     Known Problems and Restrictions  . . . . . . . . . 5-3
H         5.3.1     Non-AVO Terminals  . . . . . . . . . . . . . . . 5-3
H         5.3.2     Dictionary Status Report . . . . . . . . . . . . 5-3
H         5.3.3     Lines With More Than 255 Characters  . . . . . . 5-3
H         5.3.4     RUNOFF Support . . . . . . . . . . . . . . . . . 5-4
 
 
; APPENDIX A      INCORPORATING DECSPELL INTO ALL-IN-1 V1.3
  
H         A.1     The Procedure  . . . . . . . . . . . . . . . . . . A-1
 
 
&                                  iii
  H         A.2     Using DECspell from ALL-IN-1 V1.3  . . . . . . . . A-5
H         A.3     Creating the DEFAULT Personal Dictionary . . . . . A-5
H         A.4     Creating Other Personal Dictionaries . . . . . . . A-6
 
 
9 APPENDIX B      INCORPORATING DECSPELL INTO ALL-IN-1 V2
  
H         B.1     The Procedure  . . . . . . . . . . . . . . . . . . B-1
H         B.2     Using DECspell from ALL-IN-1 V2  . . . . . . . . . B-5
H         B.3     Creating ALL-IN-1 Personal Dictionaries  . . . . . B-5
 
 
7 APPENDIX C      SYSTEM FILES ASSOCIATED WITH DECSPELL
  
 
' APPENDIX D      SEVERE ERROR MESSAGES
  
H         D.1     Associated With Master Dictionaries  . . . . . . . D-1
H         D.2     Associated with DX documents . . . . . . . . . . . D-1
H         D.3     Associated with Formatter  . . . . . . . . . . . . D-3
H         D.4     Miscellaneous  . . . . . . . . . . . . . . . . . . D-4
 
 
% APPENDIX E      IVP OUTPUT EXAMPLES
  
 
' APPENDIX F      INTERACTIVE TEST FILE
  
 
$ APPENDIX G      REPORTING PROBLEMS
 
 Preface
	 Preface
  
H The DECspell System and Installation Guide describes the procedure for
H installing  DECspell  on a VAX/VMS system, and the procedure to verify
0 that DECspell has been installed successfully.
 
- It also provides advice and information on:
  
+       .  How to make best use of DECspell
  
-       .  Hardware and software requirements
  
4       .  How to incorporate DECspell into ALL-IN-1
 
        .  DECspell system files
 
 
 
 Intended Audience
 Intended Audience
  
H This guide is intended primarily for VAX/VMS system managers who  wish
H to  install  DECspell  on their system.  It is also intended for users
1 who require further information about DECspell.
  
 
 
&                                   iv
   Related Documents
 Related Documents
t 
' How to Use DECspell (the user's card)

 
D ALL-IN-1 Office Menu V1.3 Application Programmer's Reference Guide
 
* ALL-IN-1 Office Menu V2 User's Reference
 
< ALL-IN-1 Office Menu V2 Application Programmer's Reference
 
0 VAX/VMS System Management and Operations Guide
 
H You may also need to refer to the various  VAX  Software  Installation
	 Guides.
g 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
%                                   v
  I Document Structure
  Document Structure
 
G Chapter  1         Contains the introduction.  Lists the hardware and
 =                    software requirements. Describes the kit
                      components.
 
? Chapter  2         Describes how to prepare for installation.
 A                    Describes the installation procedure and the
s,                    verification procedure.
 
@ Chapter  3         Gives some guidance on the use of DECspell.
 
G Chapter  4         Describes how to tune the performance of DECspell.

 
0 Chapter  5         Contains the release notes.
 
I Appendix A         Describes how to incorporate DECspell into ALL-IN-1 
                     V1.3.
 
I Appendix B         Describes how to incorporate DECspell into ALL-IN-1 

                    V2.
 
. Appendix C         Lists the DECspell files.
 
C Appendix D         Describes severe error messages that DECspell 
 G                    displays when it fails, and how to deal with them.
p 
> Appendix E         Lists specimen output of the Installation
B                    Verification Procedure, for each type of kit.
 
F Appendix F         Contains the text of the file that is used in the
E                    interactive test, which is the final part of the
 9                    Installation Verification Procedure.
a 
C Appendix G         Describes who to contact if you have problems.
m 
 
" Conventions Used in This Document
# Conventions Used in This Document
i 
 Convention         Meaning
 
C Dot Matrix         Indicates output lines or prompting characters
 ;                    displayed or printed at your terminal.
E 
C Red print          Indicates commands or responses that you type.
  
< <text>             A name that is context dependent. Valid
F                    alternatives or examples are given in the body of
                    the text.
 
 
 
 
 
 
 
 
&                                   vi
 
  
 
 
 
 
 
 
 
 
 
 
)                               CHAPTER 1
  
2                     INTRODUCTION AND REQUIREMENTS
3                     INTRODUCTION AND REQUIREMENTS
e 
 
 
 1.1  Introduction
 1.1  Introduction
S 
H You install DECspell  using  the  VMSINSTAL  command  procedure.   The
. installation procedure only requires you to:
 
8       .  Set up proper conditions for the installation
 
       .  Load the media
h 
H       .  Respond to any queries and prompts that are output during the
!          installation procedure
o 
H Installation takes about 30 minutes for RX01 diskettes, 60 minutes for
= TU58 cassettes, and 15 minutes for 1600 BPI magnetic tapes.
  
 
 
 1.2  Hardware Requirements
D 1.2  Hardware Requirements
 
H DECspell is installed on  a  VAX/VMS  system  configuration  having  a
H minimum  of  3000  disk  blocks  available  on the system disk.  If an
H additional dictionary is installed a  further  1100  disk  blocks  are
 required.
  
H It is recommended that the installation is performed  on  a  hard-copy
H terminal.   The final part of the Installation Verification Procedure,
H the interactive test, requires the use of a suitable  video  terminal:
, a VT100, VT200, or a VT52 series terminal.
 
 
 
 1.3  Software Requirements
1 1.3  Software Requirements
 
% The following software is required:
1 
 
 
 
 
&                                  1-1
 
9      1   VAX/VMS operating system, version 3.5 or later
. 
H      2   If you intend to use DECspell from ALL-IN-1, ALL-IN-1 version
          1.3 or later
E 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  1-2
 .
 1.4  The Kit
  1.4  The Kit
 
H The DECspell software is distributed on RX01 diskettes,  TU58  DECTAPE
H II  cartridges,  or  9-track  1600  BPI magnetic tapes.  The number of
H volumes in the kit depends on which  kit  you  are  installing.   Each
H volume  has  a  unique physical label.  The volumes must be mounted in
 order.
 
@ The installation procedure is the same for all types of media.
 
H There are two types of kit, basic and  update.   The  basic  kits  are
H complete  products.   An  update  kit  adds  an  extra dictionary to a
! previously installed basic kit.
. 
/ Table 1-1 shows the different kits available.
. 
<                          Table 1-1: The DECspell V1.1 Kits
 
M   Title                   Product        Q Numbers           Kit type      
.L                           Identifier                                      
 
 
L   DECspell verifier       LNGVCA        QC650-HM, QD650-HM   Basic        
L   and corrector with                    QE650-HM, QC650-HG                
L   American dictionary                   QD650-HG, QE650-HY                
 
 
 
L   DECspell verifier and   LNGVCB        QC651-HM, QD651-HM   Basic        
L   corrector with                        QE651-HM, QC651-HG                
L   British dictionary                    QD651-HG, QE651-HY                
 
 
 
L   DECspell additional     LNGALA        QC655-HM, QD655-HM   Update       
L   American dictionary                   QE655-HM, QC655-HG                
L                                         QD655-HG, QE655-HY                
 
 
 
L   DECspell additional     LNGALB        QC656-HM, QD656-HM   Update       
L   British dictionary                    QE656-HM, QC656-HG                
L                                         QD656-HG, QE656-HY                
 
&                                 NOTE
 
>          The product identifiers in the above table are part
<          of the kit description on the distribution media.
 
 
 
 
 
 
 
 
 
&                                  1-3
 
. 
 
 
 
 
 
 
 
 
 
 
)                               CHAPTER 2

 
2                      PREPARATION AND INSTALLATION
3                      PREPARATION AND INSTALLATION
L 
 
 
  2.1  Preparing for Installation
! 2.1  Preparing for Installation
  
8 Before you begin installing DECspell do the following:
 
H      1   Check the distribution  kit  for  DECspell  is  complete  and
H          correct  according to the bill of materials included with the
          kit.
  
      2   Make sure there are:
. 
H           .  3000 free blocks on the system disk for a DECspell  basic
              kit, and
N 
H           .  a further 1100 blocks  if  an  additional  dictionary  is
              being installed.
l 
 
#      3   Back up the system disk.
p 
?      4   Make sure there are no users logged into the system.
o 
H      5   Make a note of the the product identifier from Table 1-1, The
          DECspell Kits.
o 
+                                      NOTE
  
@                1 A basic kit  (Product  Identifiers:   LNGVCA,
@                  LNGVCB)  must already be installed if you are
@                  installing    an    update    kit    (Product
1                  Identifiers:  LNGALA, LNGALB).
y 
@                2 Do not move the files in your basic kit  from
@                  the  system disk to another area.  If you do,
@                  you will not be able  to  install  an  update
                  kit.
a 
 
 
 
&                                  2-1
 lB      6   Obtain a copy of the user's card - How to Use DECspell.
 
H      7   During installation you are asked whether you require  access
H          to  DECspell through ALL-IN-1.  (ALL-IN-1 is DIGITAL's office
          automation system.)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  2-2
  H          Decide now whether you  wish  to  incorporate  DECspell  into
H          ALL-IN-1.   Several  files will be copied into the SYS$UPDATE
H          directory.  (See  Appendix  A,  Incorporating  DECspell  into
H          ALL-IN-1  V1.3,  and  Appendix B, Incorporating DECspell into
          ALL-IN-1 V2.)
 
H      8   It is recommended that you perform the  installation  on  the
H          system  console, a hard-copy terminal.  However, installation
0          can be performed on a video terminal.
 
H          If you use a hard-copy terminal, make sure that  you  have  a
H          video  terminal  available  to complete the final part of the
E          Installation Verification Procedure, the interactive test.
L 
 
 
 
 2.2  Installing DECspell
g 2.2  Installing DECspell
 
@ Take note of the following points before you install DECspell:
 
H       .  The installation procedure (below) assumes you are installing
B          on the console, and displays CSA1:  as the device name.
 
H       .  The wording of the messages displayed may vary, depending  on
H          the  version  of  VMS  being  used.   Some  questions may not
          appear.
 
H       .  During this installation procedure  a  number  of  cautionary
H          messages  and  general  information  messages,  which are not
H          documented here,  may  display.   Please  read  all  messages
6          carefully and follow the advice they offer.
 
H       .  If the following error messages display at any  time,  during
H          the  installation,  you  may need to increase the global page
H          table.   Otherwise,  reboot  your  machine  and  restart  the
"          installation procedure:
 
7          %SYSTEM-F-GPTFULL, global page table is full
  
I          %VMSINSTAL-F-NOREINSTAL, Image VMI$ROOT:[SYSLIB]DCLTABLES.EXE;
 =                                   could not be re-installed
G 
S          %VMSINSTAL-F-UNEXPECTED, Installation terminated due to unexpected event
h 
 
- Now follow these steps to install DECspell:
  
? 1   Log in under the privileged VMS system manager's account.
  
0 2   Establish the following default directory:
 
     $ SET DEFAULT SYS$UPDATE
 
 
 
 
&                                  2-3
 s> 3   Type the following command to initiate the installation:
 
,     $ @VMSINSTAL <product identifier> DEV:
 
G     where <product identifier> is the product identifier described in

D     Table 1-1, The DECspell V1.1 Kits, and DEV: is the name of the
3     device on which you are installing DECspell. 
  
$     The following message appears:
 
 
A                 VAX/VMS Software Product Installation Procedure
N 
      It is dd-mmm-yyyy at hh:mm
5     Enter a question mark (?) at any time for help.
  
A     %VMSINSTAL-W-DECNET, Your DECnet network is up and running.
n 
@     where dd-mmm-yyyy and hh:mm are the current date and time.
 
C 4   If other users are accessing the system the following message
      may appear:
  
 
C     %VMSINSTAL-W-ACTIVE, The following processes are still active
r 
         <name>

           .
o
           .
o
           .
s+     * Do you want to continue anyway [NO]
n 
 
G     where <name> refers to the process name of a user logged into the
.
     system.
u 
G     It is not advisable to continue, so type N to halt VMSINSTAL, ask
hH     any users to log out, and then restart the installation procedure.
 
D 5   If you answer YES to the above question or no users are logged
5     into the system, the following message appears:
e 
 
D     * Are you satisfied with the backup of your system disk [YES]?
 
 
G     If you are not satisfied type N, do a disk backup and restart the
e2     installation.  If you are satisfied type Y. 
 
$ 6   The following message appears:
 
 
7     Please mount the first volume of the set on CSA1:
h     * Are you ready?
 
 
 
&                                  2-4
  A     Mount the first volume of the set, an RX01 diskette, a TU58
5;     cartridge, or a magnetic tape, on the console device.
  
F     (If you unfamiliar with the loading of media refer to the VAX-11
#     Software Installation Guide.)

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  2-5
 wC 7   Type Y and press RETURN when you have mounted the volume. The
s      following message appears:
 
 
@     %MOUNT-I-MOUNTED, <product identifier>01 mounted on _CSA1:
 
/     The following products will be processed:
i 
     <product identifier> V1.1
e 
G          Beginning installation of <product identifier> V1.1 at hh:mm
  
:     %VMSINSTAL-I-RESTORE, Restoring product saveset A...
 
 
>     It takes about 10 minutes for an RX01 to be restored, 15
F     minutes for a TU58 cassette, and 5 minutes for a magnetic tape. 
 
H     After the volume has been restored, and if there is more than than
E     one volume in the kit you are installing, the following message
      appears:
 
 
6     %BACKUP-I-RESUME, resuming operation on volume 2
?     %BACKUP-I-READYREAD, mount volume 2 on _CSA1: for reading
f     Enter "YES" when ready:
M 
 
 
D 8   Remove the volume and mount the next volume.  Type Y and press
%     RETURN when you have done this.
c 
= 9   Repeat step 8 for each additional volume when prompted.
  
G 10  When all the volumes have been restored and if you are installing
 1     a basic kit, the following message appears:
5 
 
@     * Do you want to run the IVP after the installation [YES]?
 
G     If you are using a video terminal, you are recommended to run the
ND     IVP afterwards, to check that the installation was successful.
I     (You cannot run the IVP from a hard-copy terminal.)  Press RETURN. 
  
$ 11  The following message appears:
 
 
G     * Do you want to purge files replaced by this installation [YES]?
D 
 
I     You no longer need files replaced by this installation, so you are 
GB     recommended to purge them to save disk space.  Press RETURN.
 
 
 
 
 
&                                  2-6
  G 12  If you are installing a basic kit, the following message appears:
t 
A     * Do you require access to DECspell through ALL-IN-1 [YES]?

 
H     If you wish to use DECspell from ALL-IN-1, press RETURN. (When you
A     have completed this installation procedure, see Appendix A,
 ?     Incorporating DECspell into ALL-IN-1 V1.3, or Appendix B,
L0     Incorporating DECspell into All-IN-1 V2.) 
 
H     If you do not wish to use DECspell from ALL-IN-1, type N and press

     RETURN.
  
 
H 13  If you are not installing an additional dictionary, the following 
     message appears:
 
 
P     %<product identifier>-I-LINKIMAGE, Linking DECspell images, please wait...
 
 
E     If you intend to use DECspell from ALL-IN-1, a message appears 
 F     confirming that the ALL-IN-1 DECspell files have been placed in 
     SYS$UPDATE. 
 
$     The following message appears:
     
 
T     %VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
 
 
 
D     If you answered YES to run the IVP after the installation, the
G     Installation Verification Procedure now begins.  Each type of kit
a*     has its own verification procedure. 
 
E     See Appendix E, IVP Output Examples, for an example of the text
sF     that displays during the Installation Verification Procedure for
     each type of kit.
f 
B     At the beginning of any verification procedure the following
     message appears:
 
 
     
P     VAX DECspell V1.1 <product identifier> Installation Verification Procedure
     starting
 
 
 
 
 
 
 
 
 
 
 
&                                  2-7
 eC         A series of tests are then made, the results of which are

L         displayed on the terminal.  Once the verification is complete, the
%         following messages appear: 
  
 
O     VAX DECspell V1.1 <product identifier> dd-mmm-yyyy hh:mm IVP Successfully
      completed
  
 
J            Successful installation of <product identifier> V1.1 at hh:mm
 
O     Enter the products to be installed from the next distribution volume set.

     * Products:

 
 
 
+     Type CTRL/Z to exit from VMSINSTAL.  
  
$ 14  The following message appears:
 
 
5     * Do you want to mount the console volume [NO]?
e 
 
G     It is recommended that the console volume is remounted, so type Y
e     and press RETURN. 
 
$ 15  The following message appears:
 
 
     Please mount it on CSA1:.
e     * Are you ready?
 
 
H     Replace the console volume.  Type Y and press RETURN when you have
     done this.  
 
$ 16  The following message appears:
 
 
4     %MOUNT-I-MOUNTED, CONSOLE    mounted on _CSA1:
 
0             VMSINSTAL procedure done at hh:mm 
  
 H     To complete the IVP, for the kits with product identifiers LNGVCA,
A     LNGVCB, follow the instructions displayed to you during the
SH     Installation Verification Procedure. For examples of this text see
'     Appendix E, IVP Output Examples. 
o 
D     The final test, called the interactive test, demonstrates that
H     DECspell has been installed correctly and is functioning properly.
G     The test requires you to run DECspell on a video terminal using a
 E     test document provided. For a listing of the document text, see
 (     Appendix F, Interactive Test File.
 
 
 
&                                  2-8
 
  
 
 
 
 
 
 
 
 
 
 
)                               CHAPTER 3
  
0                        ADVICE ON USING DECSPELL
1                        ADVICE ON USING DECSPELL
T 
 
 
H This chapter contains information to help you and the  users  on  your
H system  make  the  most  effective  use of DECspell.  It also contains
H information that may help you in answering users' queries or problems.
 
 
 
 3.1  Personal Dictionaries
M 3.1  Personal Dictionaries
 
H Personal dictionaries are lists maintained by users.   The  words  and
H names  contained  in  them  are  words  which  are  not  in the master
H dictionary.  DECspell is easier to use when personal dictionaries  are
H used  for  checking,  because  fewer  valid  words  are highlighted as
	 errors.
d 
H Users should  be  encouraged  to  make  full  use  of  their  personal
 dictionaries.
t 
 
 
) 3.1.1  Using DECspell for the First Time

* 3.1.1  Using DECspell for the First Time
 
H If you are using DECspell from  ALL-IN-1  V2,  read  section  3.1.1.2.
H Otherwise, read section 3.1.1.1.  (This includes ALL-IN-1 V1.3 users.)
 
 
 
, 3.1.1.1  Using DECspell Outside ALL-IN-1 V2
H 3.1.1.1  Using DECspell Outside ALL-IN-1 V2 - The first  time  a  user
H runs DECspell he will not have a default personal dictionary.  This is
H the personal dictionary that DECspell  always  uses  unless  the  user
H specifies  otherwise.   DECspell  will  ask whether the user wants one
H created.  If  the  user  answers  NO,  this  question  is  asked  each
H subsequent  time  the  user  runs DECspell.  If the user answers YES a
H default  personal  dictionary  is  created,   with   the   file   name
 SYS$LOGIN:PERSONAL.LGP.
a 
H Personal dictionaries are ASCII files.  Users can create  and  add  to
H other  personal  dictionaries using an editor, for example EDT.  There
 
 
&                                  3-1
 gH can be more than one word per line; separate the  words  with  spaces.
  The words can be in any order.
 
 
 
) 3.1.1.2  Using DECspell from ALL-IN-1 V2
nH 3.1.1.2  Using DECspell from ALL-IN-1 V2 - The first time a user  runs
H DECspell from ALL-IN-1 V2, an empty personal dictionary is created for
H that user.  It is called PERSONAL, and is stored in  the  DICTIONARIES
H folder.   (Personal  dictionaries  are ALL-IN-1 documents, with a file
 type of DICTIONARY.)
 
H However, if a user already has a personal dictionary outside  ALL-IN-1
H (SYS$LOGIN:PERSONAL.LGP),  then  ALL-IN-1  takes  this as the PERSONAL
H dictionary.  Each time the user updates the dictionary, both  PERSONAL
H and  PERSONAL.LGP  are  updated.  In this way, people can use the same
G personal dictionary when running DECspell inside or outside ALL-IN-1.
  
 
 
2 3.1.2  Using Imported Dictionaries in ALL-IN-1 V2
3 3.1.2  Using Imported Dictionaries in ALL-IN-1 V2
u 
H In  addition  to  dictionaries  in  the  user's  own   File   Cabinet,
H dictionaries  transferred  from  VMS,  or  mailed  from other ALL-IN-1
H accounts can be used.  However, DECspell does not recognize  these  as
2 dictionaries unless the user does the following:
 
H      1   Dictionaries transferred from VMS, using the DT option on the
          WP menu --
t 
H          When transferring a dictionary, users should press Gold A  at
H          the  Creating  From  VMS  File  form,  to  display additional
H          fields.  They should then enter DICTIONARY  in  the  Handling
H          field.   (Refer to the ALL-IN-1 User's Reference volume 2 for
.          details on transferring documents.)
 
H          If a user has transferred the dictionary without doing  this,
H          he  should  enter Convert Document (CD) from the File Cabinet
=          menu, and convert the document type to DICTIONARY.

 
H      2   Dictionaries mailed  from  another  ALL-IN-1  account,  using
+          ALL-IN-1 Electronic Messaging --
  
H          When  users  mail  dictionaries  using  ALL-IN-1   Electronic
H          Messaging,  they  should mail them as attachments.  (Refer to
H          the ALL-IN-1 User's Reference volume 1 for details on sending
H          mail.)  The  filed  attachments  can  then  be  used to check
          documents.
  
 
 
 
 
 
 
 
 
 
&                                  3-2
 p6 3.1.3  Sharing Personal Dictionaries with Other Users
7 3.1.3  Sharing Personal Dictionaries with Other Users
n 
H ALL-IN-1  does  not  allow  users  to  share  personal   dictionaries.
H However,  outside  of  ALL-IN-1,  you  can specify additional personal
H dictionaries with the /DICTIONARY qualifier.  Users  should  refer  to
H their   own  dictionaries  by  name.   They  can  use  other  people's
H dictionaries, but will need to specify the directory for  dictionaries
H located  in  other  accounts.   For  example,  user  Brown  issues the

 command:
 
8 $ SPELL/DICTIONARY=(TECHNICAL,[SMITH]COMPANY) NAME.TXT
 
= This will cause DECspell to use the following dictionaries:
N 
+ SYS$LOGIN:PERSONAL.LGP       (by default)
sA SYS$LOGIN:TECHNICAL.LGP      (one of user Brown's dictionaries)
 A [SMITH]COMPANY.LGP           (one of user Smith's dictionaries)

 
H DECspell requires Read access to additional dictionaries in  order  to
H use   them  for  verification.   DECspell  requires  Write  access  to
H additional dictionaries if you wish to add words while using DECspell.
 
H You can use this feature to set up a dictionary  that  can  be  shared
H between  users.   You  can  set  up shared dictionaries with Read-only
H access to prevent the addition of incorrectly  spelled  words.   (This
? means that users cannot add any words to those dictionaries.)
t 
 
 
= 3.1.4  System Messages Associated with Personal Dictionaries
t> 3.1.4  System Messages Associated with Personal Dictionaries
 
H If a user is running DECspell from ALL-IN-1, an error message  appears
H if  he types an incorrect name when specifying additional dictionaries
B to be used for checking.  ALL-IN-1 then lets the user try again.
 
H Outside of ALL-IN-1, when a user invokes  additional  dictionaries  at
H the start of using DECspell (with the /DICTIONARY switch), a number of
< messages may appear if he makes any one of these mistakes:
 
/       .  Specifies the dictionary incorrectly
r 
H       .  Specifies the directory in which  the  dictionary  is  stored
          incorrectly
 
H       .  Specifies the  device  on  which  the  dictionary  is  stored
          incorrectly
 
G       .  Specifies a dictionary that is protected against Read access
n 
H The user is asked if he wishes to continue.  He can type Y to continue
H without  using  the  incorrectly specified dictionary or type N, start
. DECspell again and respecify the dictionary.
 
 
 
 
 
&                                  3-3
 
 3.1.5  Words in Dictionaries
e 3.1.5  Words in Dictionaries
 
H DECspell dictionaries contain whole words only.  There are no  derived
H forms.   Separate entries exist for the plural and possessive forms of
H words in dictionaries.   If  a  user  adds  a  word  to  his  personal
H dictionary  he  may  also  need to add the plural and possessive forms

 separately.
  
H Many hyphenated words are stored in the  dictionary  as  whole  words.
H DECspell  also  handles  compound  words  (valid  words separated by a
H single hyphen) by checking each part in the dictionary.  The  compound
H word  is  only  accepted  if  both  halves  are valid and have correct
H capitalization.  Compound words can be added to personal dictionaries.
 
H DECspell handles abbreviations by first checking the word without  the
H trailing  period.   If it is not found a second check is made with the
 trailing period appended.
h 
 
 
 3.2  The HELP Key
 3.2  The HELP Key
a 
H The HELP key used by DECspell is the  PF2  key  for  VT100  and  VT200
H series  terminals  and  the  blue  key  on the mini-keypad on the VT52
 series terminals.
  
H Alternatively you can use Gold H.   On  non-word-processing  terminals
H the  Gold  key is the PF1 key for VT100 and VT200 series terminals and
; the red key on the mini-keypad for VT52 series terminals.
h 
 
 
" 3.3  RUNOFF Documents in ALL-IN-1
# 3.3  RUNOFF Documents in ALL-IN-1
h 
H When transferring a RUNOFF document from  VMS,  users  should  do  the
? following to make DECspell recognize it as a RUNOFF document:
  
H      1   Press Gold A at the Creating From VMS File form,  to  display
          additional fields.

 
H      2   Enter RUNOFF in the Handling field.  (Refer to  the  ALL-IN-1
H          User's  Reference  volume  2 for more details on transferring
          documents.)
 
H If users have transferred RUNOFF documents without  doing  this,  they
H should  enter Update Index Information (U) from the File Cabinet menu,
) and enter RUNOFF in the Handling field.
n 
H DECspell then bypasses RUNOFF commands in the document  when  checking
 it.
. 
 
 
 
 
 
 
&                                  3-4
 n 3.4  DCL Command Qualifiers
 3.4  DCL Command Qualifiers
  
H Qualifiers modify the way DECspell works.  Users  can  use  them  when
H starting   DECspell   outside  ALL-IN-1.   Users  can  abbreviate  any
H qualifier uniquely and can use more than one qualifier at a time.  The
1 following DCL command qualifiers are available:
n 
 
	 /OUTPUT

 
H Gives the output document a new name.  If this qualifier is  not  used
H the  output  document  will  be  stored under its original name with a
 higher version number.
 
3 For example:  $ SPELL/OUTPUT=NEWNAME.TXT NAME.TXT
I 
 
 /NOOUTPUT

 
H Prevents a corrected version of the document being created.  Words can
= still be added to the personal dictionaries during the run.
l 
) For example:  $ SPELL/NOOUTPUT NAME.TXT
y 
 
 /NOPERSONAL_DICTIONARY
 
H Prevents the users's default personal dictionary (PERSONAL.LGP)  being
 used.
  
6 For example:  $ SPELL/NOPERSONAL_DICTIONARY NAME.TXT
 
 
 /PERSONAL_DICTIONARY
 
H This can be used to specify an alternative personal dictionary  to  be
H used instead of PERSONAL.LGP.  If the dictionary specified by the user
A does not exist, DECspell asks whether he would like it created.
r 
< For example:  $ SPELL/PERSONAL_DICTIONARY=DICNAME NAME.TXT
 
 

 /DICTIONARY
n 
H Specifies additional personal dictionaries for checking.   If  a  user
H wishes  to  use a dictionary for checking, he must have Read access to
H the dictionary.  If a user wishes to add words  to  a  dictionary,  he
H must  have  Write  access  to  the  dictionary.   Up  to 10 additional
1 personal dictionaries can be used for checking.
1 
 
 
 
 
 
 
 
&                                  3-5
 d? For example:  $ SPELL/DICTIONARY=(DICNAME1,DICNAME2) NAME.TXT
o 
 
	 /KEYPAD
a 
H Specifies an alternative editor mini-keypad layout.  Available keypads
' are WPS and EDT.  The default is WPS.
o 
+ For example:  $ SPELL/KEYPAD=EDT NAME.TXT
e 
 
 /MASTER_DICTIONARY
 
H Specifies an alternative master dictionary.   This  qualifier  can  be
H used  only  if  the  system  has  both dictionaries.  The dictionaries
 available are:
 
5       .  AMERICAN (the American English dictionary)
1 
3       .  BRITISH (the British English dictionary)
L 
: For Example:  $ SPELL/MASTER_DICTIONARY=BRITISH NAME.TXT
 
 
 /DX
i 
H Displays the index of the user's documents created on a word processor
H and  transferred  by  DX.   Allows  the  user  to  select the required
H document  for  checking.   (If  the  user  combines  /DX  with   other
) qualifiers, he must specify /DX first.)
  
 For example:  $ SPELL/DX
 
 
	 /RUNOFF
  
H Indicates that the document is a  RUNOFF  document,  if  it  does  not
H already  have  a  .RN%  file type, where % is any character.  DECspell
? then bypasses the RUNOFF commands when checking the document.
y 
' For example:  $ SPELL/RUNOFF NAME.TXT
i 
 
 /NORUNOFF
  
H Indicates that the document is not a RUNOFF document, if it has a .RN%
H file type.  DECspell then checks every line in the document, including
 any beginning with a period.
 
) For example:  $ SPELL/NORUNOFF NAME.RNO
) 
 
 
 
 
 
 
&                                  3-6
 t$ 3.4.1  Tailoring Command Qualifiers
% 3.4.1  Tailoring Command Qualifiers
a 
H Sometimes it is cumbersome to type in a whole line of qualifiers.   If
H the  same set of qualifiers are used frequently it is easier to set up
- a global symbol in your login command file.
s 
 For example:
 
- $ SPELL :== SPELL/MASTER=BRITISH/KEYPAD=EDT
a 
G The command SPELL will now invoke DECspell with the above qualifiers.
e 
 
 
  3.5  Finding the Version Number
! 3.5  Finding the Version Number
  
E To find the version number of DECspell a user can do the following:
s 
H While verifying a document, press the HELP key.  The top line of  each
 help frame has the format:
 
E HELP               topic for help                    VERSION NUMBER
I 
 This version number shows:
 
E       .  The version of DECspell you are using (for example, V1.1).
f 
H       .  Whether the Corrector option is present (VC).  All V1.1  kits
H          have  the  Corrector.   V1.0 kits could be Verifier only kits
          (VO).
 
H       .  Whether the master dictionary you are using  is  American  or
          British (A or B).
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  3-7
 

 
 
 
 
 
 
 
 
 
 
 
)                               CHAPTER 4
L 
*                             SYSTEM TUNING
+                             SYSTEM TUNING
t 
 
 
H To reduce the overheads associated with  invoking  DECspell,  and  the
H memory  requirements  when more than one person is using DECspell, the
H image components of DECspell may be installed as shared images to  the
 VAX/VMS system.
h 
H Specify these as shared images  using  the  VAX/VMS  INSTALL  utility.
@ (Refer to the VAX/VMS System Management and Operations Guide.)
 
H Make sure that you increase the parameters GBLPAGES (global pages) and
H GLBSECTIONS  (global  sections)  so  that  they  can  accommodate  the
 DECspell images.
 
@ The following table shows the requirements for each component:
 
5                   Table 4-1: Component Requirements
e 
G                                        Global Sections   Global Pages
d 
C Corrector:         SYS$SYSTEM:LNGSPLCOR         3             134
A 
C Shareable Library  SYS$LIBRARY:LNGSPLSHR       10             164
f 
C Dictionary         SYS$LIBRARY:LNGSPLAEM        1              72
y 
C Dictionary         SYS$LIBRARY:LNGSPLBEM        1              72
t 
 
A If these images are installed, they should be /OPEN/SHARED, and
  may be /HEADER_RESIDENT.
 
 
 
 
 
 
 
 
 
 
&                                  4-1
 
o 
 
 
 
 
 
 
 
 
 
 
)                               CHAPTER 5
  
*                             RELEASE NOTES
+                             RELEASE NOTES
e 
 
 
0 5.1  Differences Between DECspell V1.1 and V1.0
1 5.1  Differences Between DECspell V1.1 and V1.0
s 
. DECspell V1.1 has the following differences:
 
3       .  Larger, more compact master dictionaries
t 
H       .  Support for RUNOFF.  DECspell now by-passes  RUNOFF  commands
H          when  checking  documents,  instead  of  highlighting them as
          errors
n 
H       .  Support for ALL-IN-1 V2.  There is an ALL-IN-1 Spelling Check
          Dictionary menu.
w 
 
 
 
- 5.2  Software Problems Fixed by this Release
c. 5.2  Software Problems Fixed by this Release
 
/ 5.2.1  Message Numbers Appearing on the Screen
H0 5.2.1  Message Numbers Appearing on the Screen
 
H DECspell no longer displays an erroneous message at various places  on
H the  screen  when  a user's process has run out of open file quota, or
H when DECspell is being run with a working set extent that is too small
1 (less than 50).  The message that appeared was:
a 
0                        MESSAGE NUMBER XXXXXXXX
 
1 where XXXXXXXX represents a hexadecimal number.
A 
H Instead, DECspell displays the correct error messages,  as  listed  in

 Appendix D.
  
 
 
 
 
 
 
 
&                                  5-1
 a 5.2.2  Lost Output Files
  5.2.2  Lost Output Files
 
H There will no longer be lost space on disk if the user leaves DECspell
H in  an  unusual  way  (by  typing  CTRL/Y,  or if the system crashes).
F Previously, this space had to be recovered using the VERIFY utility.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  5-2
 RH Now, if the user types CTRL/Y STOP, or if the system crashes,  a  file
H called  <USER'S  FILENAME>.TMP  appears in the user's directory.  This
F file will contain the results of the checking done up to that point.
 
< If the user types CTRL/Y only, no output file is produced.
 
 
 
% 5.3  Known Problems and Restrictions
a& 5.3  Known Problems and Restrictions
 
 5.3.1  Non-AVO Terminals
  5.3.1  Non-AVO Terminals
 
H Non-AVO terminals are VT100  series  terminals  without  the  Advanced
H Video  Option.   These terminals have limited video attributes and are
H not suitable for checking DX documents containing  either  bolding  or
 underlining, because:
P 
H       .  The bolding and underlining in the DX document  is  displayed
H          as  normal  video.   If  you edit the document and insert any
H          characters in a section of text that is bolded or underlined,
1          they will not be bolded or underlined.
Y 
H       .  If you select  the  cursor  to  be  an  underline  character,
8          spelling errors will be displayed underlined.
 
 
 
 
  5.3.2  Dictionary Status Report
! 5.3.2  Dictionary Status Report
t 
H When DECspell has finished  checking  a  document,  it  displays  some
H statistics  for  each  personal  dictionary  to  which words have been
 added.  These are:
 
$       .  The number of words added
 
3       .  The new total of words in the dictionary

 
H The total number of words in the dictionary does not include any words
H greater  than  32  characters  that  you  may  have  edited  into your

 dictionary.
I 
 
 
+ 5.3.3  Lines With More Than 255 Characters
u, 5.3.3  Lines With More Than 255 Characters
 
H DECspell does not support documents containing lines  of  text  longer
H than 255 characters (that is, documents whose record length is greater
H than 255 characters).  Personal  dictionaries,  however,  can  contain
 lines of any length.
 
 
 
 
 
 
 
&                                  5-3
   5.3.4  RUNOFF Support
 5.3.4  RUNOFF Support
m 
H DECspell does not highlight incorrect RUNOFF commands as errors.  This

 means that:
i 
6       .  Incorrect RUNOFF commands will not be found
 
H       .  If a  RUNOFF  command  without  a  terminating  semicolon  is
H          incorrect,  DECspell  assumes that the whole line is a RUNOFF
H          command.  Therefore, DECspell will not highlight  any  errors
$          in the text on that line.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  5-4
 
i 
 
 
 
 
 
 
 
 
 
 
*                               APPENDIX A
 
8               INCORPORATING DECSPELL INTO ALL-IN-1 V1.3
9               INCORPORATING DECSPELL INTO ALL-IN-1 V1.3
% 
 
 
 A.1  The Procedure
c A.1  The Procedure
 
H You can use DECspell V1.1  from  ALL-IN-1  V1.3  or  V2.   Appendix  B
1 describes how to use DECspell from ALL-IN-1 V2.
  
@ You can set up DECspell to be accessed in the way you require.
 
H Before you attempt to install DECspell into ALL-IN-1 V1.3  you  should
H be  familiar  with  ALL-IN-1  and  have  read the ALL-IN-1 Application
H Programmer's  Reference  Guide.   Also  make  yourself  familiar  with
 DECspell.
  
H If you install DECspell into ALL-IN-1 V1.3 in  the  way  described  in
G this appendix it will be available from the SC option on the WP menu.
h 
H You should already have answered YES to the  following  prompt  during
= the DECspell installation procedure (section 2.2, step 12):

 
?    Do you require access to DECspell through ALL-IN-1 [YES]? 
L
         
 
H This  means  that  the  ALL-IN-1  related  files,  LNGSPLSC1.COM   and
H LNGSPLFRM.FLB,  have  been  copied  into SYS$UPDATE.  Now follow these
 steps:
 
H      1   Incorporate the DECspell personal dictionary  form  into  the
6          ALL-IN-1 form library in the following way:
 
7           -  Log into the ALL-IN-1 manager's account.
  
H           -  Copy the files from SYS$UPDATE to the ALL-IN-1  directory
,              using the following commands:
 
A              $ COPY SYS$UPDATE:LNGSPLSC1.COM DEVICE:[DIRECTORY]
C 
A              $ COPY SYS$UPDATE:LNGSPLFRM.FLB DEVICE:[DIRECTORY]
b 
 
 
&                                  A-1
 WD              where DEVICE:[DIRECTORY] is the location of ALL-IN-1.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  A-2
  H      2   Copy the form LNGSC1 in the form  library  LNGSPLFRM  to  the
:          library of ALL-IN-1 forms in the following way:
 
           -  Run ALL-IN-1.
 
H           -  At  the  ALL-IN-1  Main  Menu,  enter  FD.    The   Forms
-              Development menu is displayed.
e 
H           -  Enter the CO option to copy a known form to another  form
              library.
L 
H           -  When the Extract and Copy a Form Definition form appears,
/              enter the following information:
G 
6              Destination Form Library:  OALIB:OAFORM
,              Form Name to Extract:  LNGSC1
4              Source Form Library:  OALIB:LNGSPLFRM
 
H              Do  NOT  enter  the  file  type  FLB   in   the   library
H              specifications.   Press RETURN when complete and the form
8              will be copied into the ALL-IN-1 library.
 
 
H      3   Make  DECspell  accessible  as  an  ALL-IN-1  option  in  the
          following way:
  
4           -  Return to the Forms Development menu.
 
/           -  Type E to edit an existing form.
G 
H           -  When the Update Argument form appears type the following:
 
5                  Form Name to Update:            WP

?                  Form library containing form:   OALIB:OAFORM
  
H           -  When the form appears enter EDIT at the  command  prompt.
H              If  there  is  no  line describing the SC option, enter a
"              line describing it.
 
E           -  When you have finished editing return to command mode.

 
 
H      4   Type NAME to create an entry in the name  table.   Enter  the
H          following  line  in  the  table,  or if a line already exists
&          change it to the following:
 
              Name    Data
               
 /              SC      COMMAND LNGSPLSC1/NODUMP
i 
L          If the name table is full the last line of the table will contain
;          the name of the continuation form, for example: 
w 
 
              Name     Data
 
 
&                                  A-3
 F              
a              .MORE    WP2
e 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  A-4
 i&      5   Type SAVE and press RETURN.
 
<      6   When the Forms Development menu appears, enter E.
 
H      7   When the Update Argument form appears enter the name  of  the
9          continuation form in the Form to Update field.
P 
H      8   Enter or change the line describing the SC option in the  way
%          described in step 4 above.
  
H      9   When you have entered the line in the name  table  describing
5          the SC option, press RETURN and type SAVE.
s 
H          DECspell will now be available for users.  However, any users
H          currently  using  the system must log out and log in again to
          use this option.
X 
H     10   When you are sure that DECspell is installed  correctly  into
H          ALL-IN-1,   delete   the   two   files,   LNGSPLSCI.COM   and
(          LNGSPLFRM.FLB, in SYS$UPDATE.
 
 
 
 
' A.2  Using DECspell from ALL-IN-1 V1.3
p( A.2  Using DECspell from ALL-IN-1 V1.3
 
H At the Document Processing (WP) menu,  select  the  required  document
8 using the SEL option.  Then enter SC and press RETURN.
 
H A form appears showing the personal dictionaries that will be used for
H checking.   You  can  enter any additional dictionaries required.  Use
H the  ALL-IN-1  document  names  for  these   dictionaries.    If   the
@ dictionaries displayed are the ones you require, press RETURN.
 
 
 
. A.3  Creating the DEFAULT Personal Dictionary
/ A.3  Creating the DEFAULT Personal Dictionary
F 
H The first time a new user runs DECspell from within ALL-IN-1 a default
H personal  dictionary  is automatically created for him if one does not
H already    exist.     This    dictionary    has    the    file    name
H SYS$LOGIN:PERSONAL.LGP.   In  order  to make this dictionary available
! from ALL-IN-1 do the following:
r 
      1   Run ALL-IN-1.
 
H      2   At the ALL-IN-1 Main Menu, enter  DM.   The  Desk  Management
          menu is displayed.
  
/      3   Enter FC (File Cabinet Maintenance).
c 
 
 
 
 
 
 
&                                  A-5
  H      4   Enter A (Add VMS File to Document Database).  When  the  form
(          appears, enter the following:
 
@                 Document name to create:   PERSONAL DICTIONARY
C                 VMS file name to be used:  SYS$LOGIN:PERSONAL.LGP
o 
:          Add any additional information you may require.
 
 
H The personal dictionary is now available as an ALL-IN-1  document  and
! may be edited from the WP menu.
i 
 
 
* A.4  Creating Other Personal Dictionaries
+ A.4  Creating Other Personal Dictionaries
  
H Create other personal dictionaries outside ALL-IN-1.   Give  them  the
H default  file  specification  of SYS$LOGIN:NAME.LGP, where NAME is the
H name of the dictionary.  Make the dictionaries available for use  from
H ALL-IN-1  in  the same way as described above for the default personal

 dictionary.
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  A-6
 
  
 
 
 
 
 
 
 
 
 
 
*                               APPENDIX B
 
7                INCORPORATING DECSPELL INTO ALL-IN-1 V2
h8                INCORPORATING DECSPELL INTO ALL-IN-1 V2
 
 
 
 B.1  The Procedure
. B.1  The Procedure
 
; Before you install DECspell into ALL-IN-1 V2, you should:
F 
A       .  Make yourself familiar with both DECspell and ALL-IN-1
n 
H       .  Make sure you have the following VMS  system  privileges  set
          up:
 
              . SYSPRV
               . EXQUOTA
              . PRMGBL
t              . SYSGBL
  
H          PRMGBL and SYSGBL are needed when you recompile and reinstall
(          the OAFORM library in Step 5.
 
H       .  Make sure you have the  ALL-IN-1  PRVCMD  privilege  set  up.
H          This  is  needed  when you recompile and reinstall the TXL in
          Step 6.
 
<       .  Make sure that no users are logged into ALL-IN-1.
 
*                                     NOTE
 
C                  If WPS-PLUS/ALL-IN-1 was already on your system 
 @                  when you installed DECspell, you must relink 
E                  WPS-PLUS and ALL-IN-1 before continuing with this 

B                  procedure.  Refer to the ALL-IN-1 Installation 
*                  Guide for more details.
 
 
H If you install DECspell into ALL-IN-1 in the  way  described  in  this
H section  it  will  be  available  from the SC option on the WP and EMC
H menus.  The Spelling Check Dictionary Menu will be available from  the
H SCD  option on any ALL-IN-1 menu.  The option will be displayed on the

 WP menu.
 
 
&                                  B-1
 iH You should already have answered YES to the  following  prompt  during
= the DECspell installation procedure (section 2.2, step 12):
  
B    Do you require access to DECspell through ALL-IN-1 [YES]?    
 
A This means that the following files are copied into SYS$UPDATE:
d 
0     . LNGSPLFRM.FLB            . LNGSPLSC2.SCP
0     . LNGSPLSC1.COM            . LNGSPLSEL.SCP
0     . LNGSPLSCI.COM            . LNGSPLVAL.SCP
0     . LNGSPLCRE.SCP            . LNGSPLMNU.SCP
0     . LNGSPLCSY.SCP            . LNGSPLIDX.SCP
0     . LNGSPLDEL.SCP            . LNGSPLIST.SCP
0     . LNGSPLDOW.SCP            . LNGSPLSC2.FLB
0     . LNGSPLEDI.SCP            . LNGSPLSC2.HLP
0     . LNGSPLFMT.SCP            . LNGSPLSCD.HLP
0     . LNGSPLINI.SCP            . LNGSPLFOL.HLP
0     . LNGSPLPOS.SCP            . LNGSPLIVP.TXT
 
 
 
"                             NOTE
 
1          The first two files (LNGSPLFRM.FLB and
C:          LNGSPLSC1.COM) are ALL-IN-1 V1.3 files, and are
;          not needed for ALL-IN-1 V2.  Delete them if you 
           wish.
 
 Now follow these steps:
O 
8      1   Run ALL-IN-1 from a system manager's account.
 
H      2   At the System Manager Functions  menu,  enter  SCI  (Spelling
H          Check  Install) to copy the ALL-IN-1 V2 files from SYS$UPDATE
H          to the appropriate ALL-IN-1 library (OA$LIB:  or OA$DO:), and
:          to update the ALL-IN-1 form and help libraries.
 
H          The steps that  follow  explain  how  to  make  the  DECspell
H          commands  visible  to the user.  You may need to refer to the
7          ALL-IN-1 Application Programmer's Reference.
  
>      3   Enter FD.  The Forms Development menu is displayed.
 
H      4   Make an entry for DECspell  in  the  WP  (Word  and  Document
A          Processing) and EMC (Electronic Messaging) menu forms.
e 
+                                      NOTE
i 
@                  You are advised to make an entry for the  SCD
@                  (Spelling  Check Dictionary) option on the WP
@                  form only.  However, it  is  accessible  from
                  all menus.
  
 
 
 
 
&                                  B-2
 m+          For each form, do the following:
p 
H           -  Select the form,  specifying  the  name  of  the  library
D              (OA$LIB:OAFORM) and the name of the form (WP or EMC).
 
&           -  Enter E to edit a form.
 
H           -  Enter S to edit the screen image.  The Form  Editor  menu
              appears.
n 
6           -  Enter LAYOUT in the Phase Choice field.
 
H           -  When the form appears, enter a  line  describing  the  SC
H              option,    and  a  line describing the SCD option (if the
5              descriptions are   not already there).
s 
H           -  Press Gold 7 (on the minikeypad) to return  to  the  Form
              Editor     Menu.
a 
9           -  Enter EXIT.  The following prompt appears:
  
8                  Do you want to save this form?  (Y/N)
 
H           -  Enter Y.  ALL-IN-1 returns you to the  Forms  Development
              menu.
 
 
H      5   Do the  following  to  recompile  and  reinstall  the  OAFORM
          library:
P 
H           -  Exit from  ALL-IN-1,  then  run  ALL-IN-1  again  without
H              initialization,  using  the following DCL command from an
.              ALL-IN-1 manager's VMS account:
 
!                 $ ALLIN1/NOINIT
  
 
F           -  Enter the following commands at the Enter CMD:  prompt:
 
+                 OA$FLO_OPEN OA$LIB:OAFORM

 
4                 OA$FBT_WRITE_LIBRARY OA$LIB:OAFORM
 
6                 OA$FBT_INSTALL_LIBRARY OA$LIB:OAFORM
 
H              (Any other form libraries can  be  recompiled  using  the
H              Precompile   Form  Library  (PCF)  option  on  the  Forms
&              Development (FD) menu.)
 
H           -  Enter the following commands at the Enter CMD:  prompt to
/              recompile and reinstall the TXL:
  
!                  OA$TXL_COMPILE
  
 
 
 
&                                  B-3
 S!                  OA$TXL_INSTALL
U 
              Press CTRL/Z.
 
H              Refer  to  the  ALL-IN-1  System  Manager's   Guide   for
&              information on the TXL.
 
H           -  Ensure    that    the     compiled     forms     library,
<              OA$LIB:OAFORM.FLC, has World:Read protection.
 
H              When you run ALL-IN-1  again,  the  SC  and  SCD  options
.              appear on the menus you edited.
 
H           -  When you are sure that DECspell  is  installed  correctly
H              into  ALL-IN-1,  you  can  delete the files listed at the
:              beginning of this appendix from SYS$UPDATE.
 
 
H      6   If WPS-PLUS/ALL-IN-1 is installed on your  system,  you  must
1          install the following as known images:
t 
(           .  SYS$LIBRARY:LNGSPLSHR.EXE
 
(           .  SYS$MESSAGE:LNGSPLMSG.EXE
 
          Do this as follows:
 
H           -  From a VMS system manager's account, enter the  following
              command:
A 
'              $ RUN SYS$SYSTEM:INSTALL
e 
;              INSTALL>SYS$LIBRARY:LNGSPLSHR.EXE/OPEN/SHARE
t 
;              INSTALL>SYS$MESSAGE:LNGSPLMSG.EXE/OPEN/SHARE
  
              Type CTRL/Z.
A 
H           -  Edit the file SYS$MANAGER:A1V2STARTUP.COM to include  the
              lines:
  
3              SYS$LIBRARY:LNGSPLSHR.EXE/OPEN/SHARE
  
3              SYS$MESSAGE:LNGSPLMSG.EXE/OPEN/SHARE
i 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  B-4
  % B.2  Using DECspell from ALL-IN-1 V2
c& B.2  Using DECspell from ALL-IN-1 V2
 
H Enter WP or EM from the Main Menu.  Enter SEL to select  the  required
+ document, then enter SC and press RETURN.
  
, DECspell will start checking the document.
 
H If you want to see a list of the dictionaries to be used  to  check  a
H document, enter SCD from either the WP or the EMC menu.  Then enter DS
H from the Spelling Check Dictionary  Menu.   The  Dictionary  Selection
H form is displayed.  You can specify additional dictionaries to be used
 for checking.
  
 
 
- B.3  Creating ALL-IN-1 Personal Dictionaries
 . B.3  Creating ALL-IN-1 Personal Dictionaries
 
H The first time a new user runs DECspell from within ALL-IN-1 V2 (using
H the   SC  or  the  SCD  option),  a  default  personal  dictionary  is
& automatically created for that user.
 
( To create other personal dictionaries:
 
H      1   Enter WP from the ALL-IN-1 Main Menu.  ALL-IN-1 displays  the
-          Word and Document Processing menu.
A 
H      2   Enter SCD.  ALL-IN-1 displays the Spelling  Check  Dictionary
          menu.
 
3      3   Enter C to create a personal dictionary.
s 
+      4   Type the name of the dictionary.
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  B-5
 
y 
 
 
 
 
 
 
 
 
 
 
*                               APPENDIX C
 
6                 SYSTEM FILES ASSOCIATED WITH DECSPELL
7                 SYSTEM FILES ASSOCIATED WITH DECSPELL
t 
 
 
H All  the  files  listed  in  this  appendix  have  a   protection   of
0 System:RWED, Owner:RWED, Group:RWED, World:RE.
 
H The following files will  be  written  onto  the  system  disk  during
 installation:
  
H File           Directory    Size (Blocks)  LNGVCA LNGVCB LNGALA LNGALB
 
E LNGSPLAED.LGS  SYS$LIBRARY      870           Y      N     Y      N
e 
E LNGSPLAEM.EXE  SYS$LIBRARY       71           Y      N     Y      N
r 
E LNGSPLBED.LGS  SYS$LIBRARY      877           N      Y     N      Y
s 
E LNGSPLBEM.EXE  SYS$LIBRARY       71           N      Y     N      Y
  
E LNGSPLCOR.EXE  SYS$SYSTEM       207           Y      Y     N      N
b 
E LNGSPLFOR.EXE  SYS$SYSTEM        42           Y      Y     N      N
a 
E LNGSPLHLP.HLB  SYS$HELP          58           Y      Y     N      N
i 
E LNGSPLIVP.TXT  SYS$UPDATE         2           Y      Y     N      N
  
E LNGSPLMSG.EXE  SYS$MESSAGE       23           Y      Y     N      N
o 
E LNGSPLNDX.EXE  SYS$SYSTEM       113           Y      Y     N      N
t 
E LNGSPLSHR.EXE  SYS$LIBRARY      162           Y      Y     N      N
. 
G If you access DECspell through ALL-IN-1 V1.3, the following files are
S) copied in addition to the above files: 
P 
H File           Directory    Size (Blocks)  LNGVCA LNGVCB LNGALA LNGALB
  
 E LNGSPLFRM.FLB  SYS$UPDATE         6           Y      Y     N      N
S 
 
 
&                                  C-1
  E LNGSPLSC1.COM  SYS$UPDATE        15           Y      Y     N      N
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  C-2
 1E If you access DECspell through ALL-IN-1 V2, the following files are
e7 copied in addition to the first list of files above: 
s 
H File           Directory    Size (Blocks)  LNGVCA LNGVCB LNGALA LNGALB
 
E LNGSPLSCI.COM  SYS$UPDATE        12           Y      Y     N      N
  
E LNGSPLCRE.SCP  SYS$UPDATE         5           Y      Y     N      N
t 
E LNGSPLCSY.SCP  SYS$UPDATE         6           Y      Y     N      N
  
E LNGSPLDEL.SCP  SYS$UPDATE         5           Y      Y     N      N
  
E LNGSPLDOW.SCP  SYS$UPDATE         4           Y      Y     N      N
e 
E LNGSPLEDI.SCP  SYS$UPDATE         3           Y      Y     N      N
o 
E LNGSPLFMT.SCP  SYS$UPDATE         4           Y      Y     N      N
  
E LNGSPLINI.SCP  SYS$UPDATE         6           Y      Y     N      N
  
E LNGSPLPOS.SCP  SYS$UPDATE         5           Y      Y     N      N
  
E LNGSPLSC2.SCP  SYS$UPDATE        14           Y      Y     N      N
  
E LNGSPLSEL.SCP  SYS$UPDATE         4           Y      Y     N      N
  
E LNGSPLVAL.SCP  SYS$UPDATE         4           Y      Y     N      N
y 
E LNGSPLMNU.SCP  SYS$UPDATE         4           Y      Y     N      N
  
E LNGSPLIDX.SCP  SYS$UPDATE         6           Y      Y     N      N
c 
E LNGSPLIST.SCP  SYS$UPDATE         4           Y      Y     N      N
  
E LNGSPLSC2.FLB  SYS$UPDATE        42           Y      Y     N      N
f 
E LNGSPLSC2.HLP  SYS$UPDATE        16           Y      Y     N      N
  
E LNGSPLSCD.HLP  SYS$UPDATE         7           Y      Y     N      N
  
E LNGSPLFOL.HLP  SYS$UPDATE         1           Y      Y     N      N
l 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  C-3
 
  
 
 
 
 
 
 
 
 
 
 
*                               APPENDIX D
 
.                         SEVERE ERROR MESSAGES
/                         SEVERE ERROR MESSAGES
  
 
 
H This chapter lists all the error messages that  appear  when  DECspell
: fails, why they have occurred and how to deal with them.
 
 
 
) D.1  Associated With Master Dictionaries
o* D.1  Associated With Master Dictionaries
 
H %LNGSPL-F-BAD_MASTDIC, Master dictionary  was  specified  incorrectly.
 See your system manager.
 
H You specified the master dictionary incorrectly when using the /MASTER
 qualifier.
 
H When using the /MASTER qualifier  specify  either  /MASTER=BRITISH  or
 /MASTER=AMERICAN
 
 
H %LNGSPL-F-FILNOTFOU, Master dictionary not  opened  -  disk  file  not
 found
l 
H The master dictionary you specified does  not  exist  on  the  system.
H Either  just  the  American or just the British dictionary is present.
' You cannot use the /MASTER qualifier.
A 
 
 
" D.2  Associated with DX documents
# D.2  Associated with DX documents
c 
H %LNGSPL-F-BAD_DX_CHAR, Illegal  DX  format  for  character.   Spelling
 check abandoned.
 
H DX characters are encoded according to specific rules.   This  message
H is raised if DECspell encounters a character within a DX document that
: does not conform to the DX data encoding specifications.
 
H Remove any unusual  character  constructions  from  the  document  and
$ retransmit it from the WPS to VMS.
 
 
&                                  D-1
 .H %LNGSPL-F-BAD_DX_FUNCT,   Illegal   DX   function.    Spelling   check
H abandoned.   DX  characters  are  encoded according to specific rules.
H This message is raised if DECspell encounters a DX function  within  a
H DX   document   that   does  not  conform  to  the  DX  data  encoding
 specifications.
_ 
H Remove any unusual constructions from the document and  retransmit  it
 from the WPS to VMS.
 
 
7 %LNGSPL-F-BAD_DX_HYPHEN, Illegal DX format for hyphen
o 
H DX characters are encoded according to specific rules.   This  message
H is  raised  if  DECspell  encounters  a  hyphen  character within a DX
B document that does not conform to the DX encoding specification.
 
H Remove  any  unusual  hyphen  constructions  from  the  document   and
$ retransmit it from the WPS to VMS.
 
 
H %LNGSPL-F-BAD_DX_EOP, Illegal DX  format  for  end_of_page  character.
 Spelling check abandoned.
  
H DX characters are encoded according to specific rules.   This  message
H is  raised  if  DECspell encounters an end_of_page character that does
+ not conform to DX encoding specification.
u 
H Remove any unusual end_of_page constructions  from  the  document  and
$ retransmit it from the WPS to VMS.
 
 
H %LNGSPL-F-BAD_DX_EOL, Illegal DX  format  for  end_of_line  character.
 Spelling check abandoned.
r 
H DX characters are encoded according to specific rules.   This  message
H is  raised  if  DECspell encounters an end_of_line character that does
+ not conform to DX encoding specification.
L 
H Remove any unusual end_of_line constructions  from  the  document  and
! restransmit it form WPS to VMS.
N 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  D-2
 /A %LNGSPL-F-BAD_DX, Illegal DX format.  Spelling check abandoned.
  
H DX characters are encoded according to specific rules.   This  message
H is  raised  if  DECspell  encounters  data in a document that does not
' conform to DX encoding specification.
M 
H Remove any unusual constructions from the document and  retransmit  it
 from WPS to VMS.
 
 
 
 D.3  Associated with Formatter
d  D.3  Associated with Formatter
 
H %LNGSPL-F-SORTWRKSET, Not enough working set space for SORT.  See your
 system manager.
  
H The sort facility in the formatter failed to get the  working  set  it
	 needed.
r 
H Increase the user's working set quota.  If the  quota  is  already  at
  maximum, increase the maximum.
 
 
H %LNGSPL-F-SORVIRMEM, Not enough virtual memory  for  SORT.   See  your
 system manager.

 
H The sort facility in the formatter failed to get the virtual memory it
	 needed.
  
H DECREASE the user's working set quota to release more memory  for  the
	 system.
  
H %LNGSPL-F-SORWRKDEV, SORT work file not a  disk  device  or  on  local
! node.  See your system manager.
L 
H The logical names for the sort facility  in  the  formatter  temporary
H work  files, SORTWORK1, SORTWORK2, are pointing to unsuitable devices;
H either to devices on another system, or to devices that are not random
 access devices (disks).
o 
H Reassign these logical names to point to a random access device  on  a
H system  from  which  you  wish to run the SPELL/FORMAT.  Alternatively
H deassign these logical names, so that the sort creates temporary  work
  files in your local directory.
 
 
H %LNGSPL-F-SOREXTWRK, SORT could not extend work file.  See your system

 manager.
 
H The sort facility in the formatter  creates  two  work  files  on  the
H device(s)  specified  by  the  logical names SORTWORK1, SORTWORK2.  If
H these logicals are undefined, the work files are created in your login
 directory.
 
 
 
 
&                                  D-3
 LH Ensure you extend your privilege for the device where SORT is creating
H the temporary work files.  If you extended the privilege, increase the
! free block space on the device.

 
 
H %LNGSPL-F-SORTMAP, SORT could not map  work  file.   See  your  system

 manager.
 
H Ensure that the system parameter 'maximum process sections' is set  to
 20.
  
 
H %LNGSPL-F-SORCLNUP, SORT did not clean up work area.  Run SPELL/FORMAT
 again.
 
B Sort failed to delete the work files and reinitialize the areas.
 
 
H %LNGSPL-F-SORNOOUT, SORT could not open a work file.  See your  system

 manager.
 
" Sort failed to open a work file.
 
H If the logical names (SORTWORK1, SORTWORK2) are not defined,  increase
H the  free  disk  space  on  the  device(s)  they point to.  Otherwise,
4 increase the free disk space on your login device.
 
 
 
 D.4  Miscellaneous
A D.4  Miscellaneous
 
H %LNGSPL-F-FILE_FNM_ERR, <NAME> document not accessible - was specified

 incorrectly
  
< You have specified the filename of a document incorrectly.
 
< Check the filename of the required document and try again.
 
> %LNGSPL-F-FILE_GEN_ERR, <NAME> document Read access failure.
% -RMS-F-DIR, error in directory name
  
> You have specified the directory for a document incorrectly.
 
= Check the name and location of the directory and try again.

 
 
> %LNGSPL-F-FILE_GEN_ERR, <NAME> document Read access failure.
: -RMS-F-CHN, assign channel system service request failed
) -SYSTEM-F-IVDEVNAM, invalid device name
h 
; You have specified the device for a document incorrectly.
h 
- Check the name of the device and try again.
  
 
 
 
&                                  D-4
  > %LNGSPL-F-FILE_GEN_ERR, <NAME> document Read access failure.
- -RMS-E-DNR, device not ready or not mounted
  
5 The device you specified was not online or mounted.
S 
F Check that the specified volume is online and mounted and try again.
 
 
H %LNGSPL-F-FILE_PRV_ERR, <NAME>  document  is  protected  against  Read
	 access.
  
< You do not have Read access to the document you specified.
 
H If you can, change the protection of the  required  document  and  try
 again.
 
 
H %LNGSPL-F-FILE_PRV_ERR, <NAME> document  is  protected  against  Write
	 access.
Y 
H Either you do not have Write access to the  specified  (or  defaulted)
D directory, or you do not have Write access to the document itself.
 
H If you do not have Write access to  the  directory,  use  the  /OUTPUT
B switch to create an output document in an alternative directory.
 
H If  you  do  not  have  Write  access  to  the  document,  change  its

 protection.
  
 
6 %DEBUGBOOT-W-INSFWSL, insufficient working set limit
 
H You are trying to run DECspell with a working set EXTENT that  is  too
 small.
 
# Increase your working set EXTENT.
  
 
7 %LNGSPL-F-FILE_FNF_ERR, <NAME> document was not found
S 
 The document does not exist.
 
< Check the name and location of the document and try again.
 
H %LNGSPL-F-FILE_DNF_ERR, <NAME> document not accessible - directory was
 not found
N 
@ The input or output directory for the document does not exist.
 
= Check the name and location of the directory and try again.
  
 
 
 
 
 
 
&                                  D-5
  H %LNGSPL-F-BAD_KEYPAD, Keypad was specified  incorrectly.   Use  either
 WPS or EDT
 
H You have specified an invalid keypad layout or incorrectly specified a
H keypad  layout  when  using  the  /KEYPAD  qualifier.  Only the keypad
H layouts WPS and EDT are supported by DECspell when using  the  /KEYPAD
 qualifier.
 
= Use a valid keypad option when using the /KEYPAD qualifier.
s 
 
G %LNGSCR-F-UNSUP_TERM, DECspell is not supported on this terminal type
r 
H DECspell  is  supported  on  the  VT100,  VT200  and  VT52  series  of
8 terminals.  Use a valid terminal type to run DECspell.
 
 
H %LNGSCR-F-INSUF_CAP, Terminal has insufficient capabilities to display

 132 cols
 
H You cannot enter 132 column mode because your VT100 terminal does  not
' have the Advanced Video Option (AVO).
u 
! Use the default 80 column mode.
h 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  D-6
 
e 
 
 
 
 
 
 
 
 
 
 
*                               APPENDIX E
 
-                          IVP OUTPUT EXAMPLES
 .                          IVP OUTPUT EXAMPLES
 
 
 
 Product Identifier: LNGVCA
 
K This is an example of the text displayed as the installation is verified:
r 
 
 
G VAX DECspell V1.1 LNGVCA Installation Verification Procedure starting
m 
 
 
5 VAX DECspell V1.1 Dictionary regression test LNGVCA
i 
, SUCCESS:        Word Parser test completed
: SUCCESS:        American-English Verifier test completed
= SUCCESS:        American-English Verify Line test completed
 ; SUCCESS:        American-English Corrector test completed
e0 SUCCESS:        Personal Memory test completed
4 SUCCESS:        Personal Dictionary test completed
- SUCCESS:        Replace List test completed
d 
9 VAX DECspell V1.1 Dictionary regression test successful
u 
 
 
% VAX DECspell V1.1 Help library test
c 
4 VAX DECspell V1.1 Help library test was successful
 
 
 
F VAX DECspell V1.1 Dictionary formatter test using a dummy dictionary
 
3 %LNGSPL-I-DUPWRDDEL, 105 duplicate words deleted.
 N %LNGSPL-S-FMTCOMPL, formatting complete.  Dictionary now contains 171 words.
 
< VAX DECspell V1.1 Dictionary formatter test was successful
 
 
 
&                                  E-1
  $ VAX DECspell V1.1 Interactive test
 
K The interactive test file has been stored in the SYS$UPDATE directory for
 K later use.  When the installation has completed, login to the system from
t( a video terminal and type the command:
 
6 $ SPELL/NOPERSONAL/NOOUTPUT SYS$UPDATE:LNGSPLIVP.TXT
 
N This test should successfully exercise the verifier corrector interactively.
 
 
O VAX DECspell V1.1 LNGVCA 26-JUN-1984 09:04:00.05 - IVP Successfully completed
i 
 
 
 
 Product Identifier:  LNGVCB
e 
K This is an example of the text displayed as the installation is verified:
  
 
 
G VAX DECspell V1.1 LNGVCB Installation Verification Procedure starting
S 
 
 
5 VAX DECspell V1.1 Dictionary Regression Test LNGVCB
c 
, SUCCESS:        Word Parser test completed
9 SUCCESS:        British-English Verifier test completed
m< SUCCESS:        British-English Verify Line test completed
: SUCCESS:        British-English Corrector test completed
0 SUCCESS:        Personal Memory test completed
4 SUCCESS:        Personal Dictionary test completed
- SUCCESS:        Replace List test completed
  
9 VAX DECspell V1.1 Dictionary regression test successful
  
 
 
% VAX DECspell V1.1 Help library test
t 
4 VAX DECspell V1.1 Help library test was successful
 
 
 
F VAX DECspell V1.1 Dictionary formatter test using a dummy dictionary
 
3 %LNGSPL-I-DUPWRDDEL, 105 duplicate words deleted.
 N %LNGSPL-S-FMTCOMPL, formatting complete.  Dictionary now contains 171 words.
 
< VAX DECspell V1.1 Dictionary formatter test was successful
 
 
 
 
 
&                                  E-2
 o$ VAX DECspell V1.1 Interactive test
 
K The interactive test file has been stored in the SYS$UPDATE directory for
cK later use.  When the installation has completed, login to the system from
 ( a video terminal and type the command:
 
6 $ SPELL/NOPERSONAL/NOOUTPUT SYS$UPDATE:LNGSPLIVP.TXT
 
N This test should successfully exercise the verifier corrector interactively.
 
 
 
O VAX DECspell V1.1 LNGVCB 26-JUN-1984 09:04:43.24 - IVP Successfully completed
  
 
 
 
 
 Product Identifier: LNGALA
 
K This is an example of the text displayed as the installation is verified:
f 
 
 
G VAX DECspell V1.1 LNGALA Installation Verification Procedure starting
  
 
 
5 VAX DECspell V1.1 Dictionary Regression Rest LNGALA
c 
, SUCCESS:        Word Parser test completed
5 SUCCESS:        This is a Verifier/Corrector system
e: SUCCESS:        American-English Verifier test completed
= SUCCESS:        American-English Verify Line test completed

; SUCCESS:        American-English Corrector test completed
o0 SUCCESS:        Personal Memory test completed
4 SUCCESS:        Personal Dictionary test completed
- SUCCESS:        Replace List test completed
k 
9 VAX DECspell V1.1 Dictionary regression test successful
T 
 
 
O VAX DECspell V1.1 LNGALA 26-JUN-1984 09:05:15.74 - IVP Successfully completed
  
 
 
 
 
 
 
 
 
 
 
 
 
&                                  E-3
   Product Identifier: LNGALB
 
K This is an example of the text displayed as the installation is verified:
n 
 
 
G VAX DECspell V1.1 LNGALB Installation Verification Procedure starting
E 
 
 
5 VAX DECspell V1.1 Dictionary Regression Test LNGALB
c 
, SUCCESS:        Word Parser test completed
5 SUCCESS:        This is a Verifier/Corrector system
e9 SUCCESS:        British-English Verifier test completed
R< SUCCESS:        British-English Verify Line test completed
: SUCCESS:        British-English Corrector test completed
0 SUCCESS:        Personal Memory test completed
4 SUCCESS:        Personal Dictionary test completed
- SUCCESS:        Replace List test completed
c 
9 VAX DECspell V1.1 Dictionary regression test successful
s 
 
O VAX DECspell V1.1 LNGALB 26-JUN-1984 09:05:38.04 - IVP Successfully completed
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  E-4
 
> 
 
 
 
 
 
 
 
 
 
 
*                               APPENDIX F
 
.                         INTERACTIVE TEST FILE
/                         INTERACTIVE TEST FILE
n 
 
 
H The following piece of text is contained in the test file used as part
H of  the  interactive  test  at  the end of the verification procedure.
? Follow the instructions in the test file to complete the IVP.
  
 
& Test Text File for LNGVCB and LNGVCA
 
7       TEST STARTID  --  YOU ARE RUNNING INTERACTIVELY
t 
H        Keep pressing RETURN to correct the highlighted errors.  If you
B        have any problems, or you are happy with the verification
C        prosess and wish to finish, tpye the letter F, followed by
s        RETURN.
 
G        As you can see, this product offers corrections just below the
vE        text.  By pressing the RETURN key, you can correct them with
uG        the suggested correction.  Digital beleives you will find this
f        product easy to use.
  
F        This product offers suggestions on the corrections list which
C        are the required spelling - with a high degree of acurasy.
I@        Detials of how this product are to be found in the user
        documentation.
  
@        You shud now be happy that the product is installed and
B        functioning correctly.  The remainder of the installation
H        prosedure will continue when you have corrected the last error.
 
 
 
 
 
 
 
 
 
 
 
 
&                                  F-1
 
  
 
 
 
 
 
 
 
 
 
 
*                               APPENDIX G
 
-                           REPORTING PROBLEMS
 .                           REPORTING PROBLEMS
 
 
 
H If  you  encounter  problems  during  the   installation,   stop   the
" installation and contact either:
 
H       .  Your Customer Support Center,  if  you  have  a  Basic  or  a
"          DECsupport contract, or
 
H       .  Your local DIGITAL office to arrange for a service  contract,
?          if you do not have a Basic or a DECsupport contract.
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
&                                  G-1
 o'                                 INDEX
t 
 
 
C ALL-IN-1                              master, messages associated
e5   dictionaries                            with, D-1

:     mailed from ALL-IN-1, 3-2         personal, 3-1, 3-3
?     transferred from VMS, 3-2         personal, creating, A-6
v>   forms                               personal, default, A-5
4     Dictionary Selection, B-5         sharing, 3-3
D     Electronic Messaging, B-2       Dictionary Selection form, B-5
F     Update Argument, A-5            Differences between versions 1.0
6     Word and Document Processing,       and 1.1, 5-1
E         B-2                         DX document error messages, D-1
    options
oA     Convert Document, 3-2           Editing ALL-IN-1 forms, A-3
VD     Forms Development, A-3          Electronic Messaging form, B-2
D     Precompile Form Library, B-3    Electronic Messaging menu, B-2
4     Spelling Check, B-3             Error Messages
E     Spelling Check Dictionary,        associated with DX documents,
P/         B-2                               D-1
r3     Spelling Check Install, B-2       severe, D-1
y4     Update Index Information, 3-4   Error messages
F ALL-IN-1 V1.3                         associated with formatter, D-3
>   incorporating DECspell into,        associated with master
;       A-1                                 dictionary, D-1
:   using DECspell from, A-5
A ALL-IN-1 V2                         File Cabinet menu, 3-2, 3-4
tE   incorporating DECspell into,      Files associated with DECspell,
e-       B-1                               C-1
m9   using DECspell from, B-5          Fixed problems, 5-1
d; ALL-IN-1, editing forms in, A-3     Form Editor menu, B-3
EF                                     Form libraries, recompiling, B-3
? Basic kit, 1-3, 2-1, 2-6            Formatter, error messages
a> Block sizes, 2-1                        associated with, D-3
F                                     Forms Development Menu, A-3, B-2
F Command qualifiers, 3-5             Forms Development menu, A-3, A-5
  Command qualifiers, tailoring,
7     3-7                             Global pages, 4-1
 : Convert Document option, 3-2        Global sections, 4-1
! Creating personal dictionaries,
t@     A-6, B-5                        Hardware requirements, 1-1
8                                     Help facility, 3-4
  
a DCL command qualifiers, 3-5
m@ DECspell kit, 1-3                   Imported dictionaries, 3-2
A DECspell V1.0, differences          Incorporating DECspell into
s<     between V1.1 and, 5-1               ALL-IN-1 V1.3, A-1
A Default personal dictionary, A-5    Incorporating DECspell into
e: Desk Management menu, A-5               ALL-IN-1 V2, B-1
2 Dictionaries                        Installation
8   ALL-IN-1, 3-2                       preparation, 2-1
6   ALL-IN-1, creating, B-5             procedure, 2-3
D   imported, 3-2                       Verification Procedure, 2-6,
4   master, 3-6                             2-7, 2-8
 
 
(                                Index-1
 o@   Verification Procedure, output    Qualifiers, tailoring, 3-7
       examples, E-1
 1 Installation Verification           Recompiling
:;     Procedure, 2-6, 2-7               form libraries, B-3
s0 Interactive test, 2-8                 TXL, B-3
8 Interactive test file, F-1          Release notes, 5-1
F IVP, 2-6, 2-7                       Relinking WPS-PLUS/ALL-IN-1, B-1
2   completing the, 2-8               Requirements
5   output examples, E-1                hardware, 1-1
i5                                       software, 1-1
 G Kit, 1-3                            RUNOFF documents, transferring to
 7   basic, 1-3, 2-1, 2-6                  ALL-IN-1, 3-4

F   update, 1-3, 2-1                  RUNOFF support, restrictions in,
-                                         5-4
  LNGALA, 1-3, C-1
? LNGALB, 1-3, C-1                    Sharing dictionaries, 3-3
e@ LNGVCA, 1-3, C-1                    Software requirements, 1-1
G LNGVCB, 1-3, C-1                    Sort facility error messages, D-3
lE Lost files, 5-2                     Spelling Check Dictionary menu,
G2                                         B-1, B-5
G Master dictionary, 3-6              Spelling Check Dictionary option,
.- Master dictionary error messages,       B-2
uD     D-1                             Spelling Check Install option,
- Media, 1-3                              B-2
h@ Menu                                Spelling Check option, B-3
=   Desk Management, A-5              SYS$HELP, files in, C-1
 @   Electronic Messaging, B-2         SYS$LIBRARY, files in, C-1
A   EMC, B-2                          SYS$LOGIN:PERSONAL.LGP, A-5
e@   File Cabinet, 3-2, 3-4            SYS$MESSAGE, files in, C-1
?   Form Editor, B-3                  SYS$SYSTEM, files in, C-1
eE   Forms Development, A-3, A-5,      SYS$UPDATE, files in, B-2, C-1,
p-       B-2                               C-2
cD   Spelling Check Dictionary, B-1,   System Manager Functions menu,
-       B-5                               B-2
 8   System Manager Functions, B-2     System tuning, 4-1
!   Word and Document Processing,
AG       3-2                           Tailoring command qualifiers, 3-7

F   WP, 3-2                           Transferring RUNOFF documents to
7 Messages                                ALL-IN-1, 3-4
a<   DECspell, 3-3                     Tuning the system, 4-1
G   error, D-1                        TXL, recompiling and reinstalling
e2                                         the, B-3
 Non-AVO terminals, 5-3
  

? Personal dictionaries, 3-1          Update Argument form, A-5
hF Personal dictionaries, creating,    Update Index Information option,
-     A-6, B-5                            3-4
s: Personal dictionaries, default,     Update kit, 1-3, 2-1
9     A-5                             Using DECspell, 3-1
s? Precompile Form Library option,       from ALL-IN-1 V1.3, A-5
 B     B-3                               from ALL-IN-1 V2, 3-2, B-5
 Problems with DECspell, 5-3
r Product identifier, 1-3
s9                                     Version number, 3-7
-4 Qualifiers, 3-5                     VMSINSTAL, 2-3
 
 
(                                Index-2
  @ Word and Document Processing form,  Words in dictionaries, 3-4
2     B-2                             WP menu, 3-2
G Word and Document Processing menu,  WPS-PLUS/ALL-IN-1, relinking, B-1
 	     3-2
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(                                Index-3
