Document revision date: 30 March 2001

Key

Format

HELP [topic]

Parameter

topic

An EVE command or other topic on which you want help. You can abbreviate the topic name. If more than one name matches your request, EVE shows a list of the matching topics so you can choose the one you want. (For example, if you type HELP SET, EVE lists all the SET commands.) If you specify a question mark (?) or if you do not specify any topic, EVE displays the list of topics. If you want help on the TPU command, EVE switches to a help library on DECTPU built-in procedures and other topics.

Description

The HELP command displays online help for EVE commands, keys, or other topics, including DECTPU built-in procedures.

EVE has four kinds of help topics:

• Command topics
  Command topics explain EVE commands and provide one or more examples or a list of steps that use the command, a list of any keys defined for the command (including EDT or WPS keys), and other information.
• Keypad topics
  Keypad topics explain EDT or WPS keys that are defined as special procedures other than as EVE commands. For example with the EDT or WPS keypad, you can press Help and then Ctrl/J to get help on the Delete Previous Word key.
• Informational topics
  Informational topics explain areas of operation, features of the editor, or concepts such as the following:

  Attributes
  Defaults
  EDT conversion
  Initialization files
  Names for keys
  Ranges and boxes

• TPU topics
  TPU topics explain DECTPU built-in procedures and other topics.

To scroll through lengthy HELP topics, press the Next Screen and Prev Screen keys (on VT100-series terminals, press KP0 and Period on the numeric keypad). To exit from HELP and resume editing, press the Return key.

To get help on DECTPU built-ins and other topics, use HELP TPU. For example, the following command displays help on the COPY_TEXT built-in:

Command: HELP TPU COPY_TEXT

The last help topic you viewed is stored in an EVE system buffer named HELP. You can edit the HELP buffer, for example, to add comments of your own. (Some editing operations, such as FILL commands, may not work in the HELP buffer.) The last topic you viewed remains in the HELP buffer until you use another HELP command (or until you exit from the editor).

You can write out the HELP buffer (for example, to keep a copy of the list of defined keys) by using the WRITE FILE command.

Note GOLD-Help is a "sleeper" key, meaning that EVE defines this key sequence but does not define a default GOLD key. The definition is enabled when you use the SET GOLD KEY, SET KEYPAD EDT, or SET KEYPAD WPS command, unless you have otherwise defined it yourself.

Example

The following example displays help on the ENLARGE WINDOW command. (HELP discards the variable parameter (in this case, 5).)

Command: HELP ENLARGE WINDOW 5
      

Key

Format

INCLUDE FILE filespec

Parameter

filespec

The file you want to include. You can use logical names and wildcards in the file specification. If more than one file matches your request, EVE shows a list of the matching files so you can choose the one you want. You can include several files in a buffer, but can include only one file at a time. If you do not specify a file, EVE prompts for one. Pressing the Return key or the Do key at the prompt without typing anything cancels the operation.

Description

The INCLUDE FILE command copies the file you specify into the current buffer, inserting its contents before the current line. INCLUDE FILE inserts the text of the specified file whether the mode of the buffer is insert or overstrike. The cursor remains on the current character after the text of the file is included.

Including a file does not change the name of the buffer or the output file associated with the buffer. If the file you are including contains tab characters, the tab stops of the current buffer apply. Including a file does not reformat (rewrap) the text. To reformat text according to the margins of the buffer, use FILL commands.

If you use a search list or wildcard directory (such as [...]) to specify a file, EVE gets the first matching file found---without displaying the $CHOICES$ buffer.

Including a large file can be slow if you use buffer-change journaling, which is the default in effect.

Related Commands

GET FILE
GET WILDCARDED FILES
OPEN
OPEN SELECTED

Example

The following command includes a file called MORE.DAT, copying it into the current buffer:

Command: INCLUDE FILE MORE.DAT
      

Key

Format

INSERT HERE

Description

The INSERT HERE command inserts at your current position what you previously copied or removed (same as the PASTE command).

By default, the text is inserted whether the buffer is in insert or overstrike mode. Existing text is pushed to the right or down. Depending on the amount of text inserted and where you are on the line, your text may go past the right margin or even partly out of view. Use FILL commands, if necessary, to reformat (rewrap) your text.

If SET BOX SELECT is in effect, INSERT HERE is the same as BOX PASTE, usually overwriting existing text. See the description of the BOX PASTE command or read the online help topic on Ranges and Boxes.

Depending on your setting, the text is inserted either from the INSERT HERE buffer in EVE or from the DECwindows clipboard. The default is SET NOCLIPBOARD, which uses the INSERT HERE buffer. For more information, see the description of the SET CLIPBOARD command.

The WPS keypad redefines the Insert Here key on the minikeypad as WPS Paste, which lets you use WPS-style alternate paste buffers or the INSERT HERE buffer, but does not use the clipboard.

Related Commands

BOX PASTE
REMOVE
SET BOX PAD
SET BOX SELECT
SET CLIPBOARD
STORE TEXT

Format

INSERT MODE

Description

The INSERT MODE command sets the mode of the current buffer to insert, as opposed to overstrike. In insert mode, as you type, the new text is inserted at the current position, pushing the cursor and any existing text to the right or down.

The mode of the current buffer is shown in the status line. You can have one buffer set to insert and another buffer set to overstrike. For buffers you create, the default is insert mode.

The default mode for editing EVE command lines or prompt lines matches your terminal setting (on character-cell terminals only), according to the DCL command SET TERMINAL and independent of the mode of your text buffers.

If SET BOX NOPAD is in effect, the mode of the buffer determines the effects of BOX CUT and BOX PASTE. In insert mode, BOX CUT causes the text to the right to "collapse" to the left, closing the gap, and BOX PASTE pushes existing lines to the right. To override these effects, use BOX CUT OVERSTRIKE and BOX PASTE OVERSTRIKE.

For a list of the commands and keys affected by the mode of the buffer, see Table 2-3.

Related Commands

CHANGE MODE
OVERSTRIKE MODE
SET BOX PAD

Key

Format

INSERT PAGE BREAK

Description

The INSERT PAGE BREAK command inserts a "hard" page break, or a form feed, appearing as a small FF .

EVE puts the form feed on a line by itself, as follows:

Cursor Positions	Effects with INSERT PAGE BREAK
Start of a line of text	Inserts a form feed and then does a RETURN command to start a new line.
Start of a blank line	Inserts a form feed and moves down to the start of the next line---without doing a RETURN command.
Elsewhere on a line	Does a RETURN command to start a new line, inserts a form feed, and then does another RETURN.

To insert a form feed in the middle of a line without causing the line to be split, use the QUOTE command and Ctrl/L.

Related Commands

MOVE BY PAGE
PAGINATE

Key

Format

LEARN

Description

The LEARN command starts a learn sequence of keystrokes to be defined as a single key. A learn sequence can comprise commands, text, or both. In some text editors and word processors, this is called a macro. You can define any of the following keys:

• Function key, such as PF4, KP7, or F20
• Control key, such as Ctrl/N
• GOLD key sequence, such as GOLD-KP7 or GOLD A
• Shifted function key, such as Shift/F14 (DECwindows only)
• Alt key combination, such as Alt/Z (DECwindows only)
• Mouse button, such as MB3 click (DECwindows only)

Do not press a key you have used in the sequence being remembered.

To cancel the definition, press the Return key or Ctrl/M, which cannot be redefined.

Your key definition overrides the current definition of the specified key, whether the EVE default, EDT keypad, WPS keypad, or your own. For example, if the key you define for the learn sequence is ordinarily defined by a keypad setting, such as EDT or WPS, your definition overrides the keypad definition. To restore the keypad definition, use the UNDEFINE KEY command.

The key definition remains in effect throughout your editing session or until you redefine or undefine the key. To save the key definition for future sessions, use the SAVE EXTENDED EVE command to create a section file. You cannot put a learn sequence in an initialization file.

A learn sequence records keystrokes rather than the key definitions at the time the sequence was created. Therefore, before you "replay" a learn sequence, check that any keys used in the sequence are defined appropriately, and also that any settings that affect the sequence are correct; otherwise, the learn sequence may fail or may not work as expected. Depending on what your learn sequence is to do, check the following:

Box settings (box selection, padding)
Buffer attributes (margins, paragraph indent, tab stops)
Clipboard setting
Contents of the INSERT HERE buffer or DECwindows clipboard
Contents of $RESTORE$ buffers
Cursor motion (bound or free)
Direction (forward or reverse)
Key definitions, including keypad setting and GOLD key
Mode (insert or overstrike)
Pending delete setting
Search attributes (white space, case exact)
Search string and direction for FIND NEXT
Tab mode (insert, movement, spaces)
Wildcard setting

Mouse operations (such as choosing DECwindows menu items) are not learned.

Related Commands

REMEMBER
UNDEFINE KEY

Example

In the following example, you create a learn sequence to bind the INSERT HERE and FILL PARAGRAPH commands to F20. Thereafter, pressing F20 inserts the text you copied or removed and then fills the current paragraph.

Command: LEARN
Press keystrokes to be learned. Press Ctrl/R to remember these keystrokes.
Command: INSERT HERE
Command: FILL PARAGRAPH
Ctrl/R
Press the key you want to use to do what was just learned: F20
Key sequence remembered.
      

Format

LINE integer [procedure]

Parameters

integer

The number of the line you want to go to. If you specify a number greater than the total number of lines in the buffer, EVE moves the cursor to the end of the buffer. If you do not specify a line number, EVE prompts for one. Pressing the Return key or the Do key at the prompt without typing anything cancels the operation.

procedure

The DECTPU procedure in which you want to go to the specified line. The procedure must be in the current buffer. You can abbreviate the procedure name but you cannot use wildcards; the name is not case sensitive. If more than one procedure matches your request, EVE shows a list of the matching procedures ($CHOICES$ buffer) so you can choose the one you want. Specifying a procedure is useful because some compiler messages refer to line numbers in a procedure.

Description

The LINE command moves the cursor to the start of a line you specify by number---either in the current buffer or within a specified DECTPU procedure in the buffer. If you do not specify a line number, the LINE command prompts for one but does not prompt for a procedure name.

If you specify a number greater than the total number of lines in the buffer, EVE moves the cursor to the end of the buffer.

To find out the current line number and total number of lines in the buffer, use the WHAT LINE command.

Related Commands

MOVE BY LINE
MOVE DOWN
MOVE UP
WHAT LINE

Examples

To move the cursor to the start of line 10 in the current buffer, use the following command:

Command: LINE 10
      

To move the cursor to the start of line 10 in a procedure named USER_PROC in the current buffer, use the following command:

Command: LINE 10 USER_PROC
      

Format

LOWERCASE WORD

Description

The LOWERCASE WORD command makes letters lowercase in a range, box, or single word. You can use LOWERCASE WORD with a select range, found range, or box. With a select range or found range, LOWERCASE WORD works on each word in the range, starting with the first character of the range and ending at the end of the range.

If there is no selection or found range, LOWERCASE WORD works on the current word. If you are between words, it works on the next word on the line.

Related Commands

CAPITALIZE WORD
UPPERCASE WORD

Example

The following commands find the next occurrence of a search string you have already specified, and then makes all the letters of the found text lowercase:

Command: FIND NEXT
Command: LOWERCASE WORD
      

Format

MARK marker-name

Parameter

marker-name

The name you want to mark the current position in the buffer. Marker names are not case sensitive and may contain embedded spaces. You cannot use wildcards (for example, an asterisk is treated as a character in the marker name). If you specify a marker name that is already used, the previous marker is canceled. If you do not specify a marker, EVE prompts for one. Pressing the Return key or the Do key at the prompt without typing anything cancels the operation.

Description

The MARK command puts an invisible marker at the current position and associates it with the name you specify. Later, using the GO TO command, you can return to the marked position. Using MARK and GO TO makes it easier to move through a large buffer or to move between buffers. Markers are not saved from session to session. To find out marker names in a buffer, use the SHOW command.

For an example of using MARK and GO TO, see the description of the GO TO command.

Key

Format

MOVE BY LINE

Description

The MOVE BY LINE command moves the cursor a line at a time in the direction of the buffer; forward or reverse, as shown in the status line. In forward direction, MOVE BY LINE moves the cursor to the end of the current line or, if you are already there, to the end of the next line. In reverse direction, it moves to the start of the current line or, if you are already there, to the start of the previous line. You can repeat the operation until you reach the bottom or top of the buffer.

The SET FUNCTION KEYS DECWINDOWS command defines F12 as START OF LINE.

Related Commands

CHANGE DIRECTION
END OF LINE
LINE
START OF LINE

Key

Format

MOVE BY PAGE

Description

The MOVE BY PAGE command moves the cursor a page at a time in the direction of the buffer; forward or reverse, as shown in the status line. A page break is a form feed (appearing as a small FF ) or the top or bottom of the buffer. Thus, if there is no form feed in the current direction, MOVE BY PAGE moves to the top or bottom of the buffer.

Related Commands

CHANGE DIRECTION
INSERT PAGE BREAK
PAGINATE

Key

Format

MOVE BY WORD

Description

The MOVE BY WORD command moves the cursor a word at a time in the direction of the buffer; forward or reverse, as shown in the status line. MOVE BY WORD always moves the cursor to the start of a word. In the forward direction, the cursor moves to the start of the next word, if any; that is, the first nonwhite-space character in the word. In reverse direction, the cursor moves to the start of the current word or, if you are already there, to the start of the previous word, if any. You can repeat the operation until you reach the bottom or top of the buffer.

Related Commands

CHANGE DIRECTION
END OF LINE
MOVE BY LINE
START OF LINE

	privacy and legal statement
6021PRO_005.HTML