Checking the Status of your Instant Capacity System
» Table of Contents |  | | » Index | | |
| | |
| ||
| ||
You can use the icapstatus command to view the status of your Instant Capacity system. With no options, the icapstatus command provides the following information:
Version number of the Instant Capacity software
System identification information (system ID, serial number, product number, unique ID)
System-contact e-mail address
Instant Capacity From e-mail address
Asset reporting status (on or off)
Temporary capacity warning period (in days)
Exception status (indicates if complex is in an exception state)
If a member of a GiCAP group, membership information and borrow/loan status of usage rights
Local virtual partition status (if applicable):
Total number of assigned cores
Number of active assigned cores
Number of inactive assigned cores
Additional cores that can be assigned with current usage rights
Number of cores that could be assigned with additional usage rights
Number of cores that can be assigned with temporary capacity
Number of cores that are deconfigured or attached to inactive cells
Local nPartition status:
Total number of configured cores
Number of Intended Active cores
Number of active cores
Number of inactive cores
Additional cores that can be assigned with current usage rights
Number of cores that could be assigned with additional usage rights
Number of cores that can be assigned with temporary capacity
Number of cores that are deconfigured or attached to inactive cells
Instant Capacity resource summary:
Number of cells without usage rights
Number of inactive cells
Amount of memory without usage rights
Amount of inactive memory
Number of cores without usage rights
Number of inactive cores
Number of cores that must be deactivated (insufficient usage rights)
Temporary capacity available
Allocation of Instant Capacity Resources among the Hard Partitions:
nPar ID
Total Cores
Intended Active Cores
Actual Active Cores
Inactive Cores
Inactive Memory
Inactive Cells
Runs iCAP (indicates whether the hard partition contains compatible Instant Capacity software)
nPar Name
See “icapstatus (1M) Manpage” for details of the icapstatus command and its output.
Sample Session of icapstatus (on HP-UX)
/usr/sbin/icapstatus
Software version: B.08.00.01
System ID: supericod
Serial number: 1234567890
Product number: A6912A
Unique ID: fffff-fff-ffffff-ffff
System contact e-mail: mjones@corp.com
From e-mail: Set to the default ('adm')
Asset reporting: on
Temporary capacity warning period: 15 days
Exception status: No exception
Local nPartition Status
------------------------------
Total number of configured cores: 8
Number of Intended Active cores: 7
Number of active cores: 6
Number of inactive cores: 2
Additional cores that can be assigned with current usage rights: 1
Number of cores that could be assigned with additional usage rights: 1
Number of cores that can be assigned with temporary capacity: 0
Number of cores that are deconfigured or attached to inactive cells: 0
Instant Capacity Resource Summary
---------------------------------
Number of cells without usage rights: 0
Number of inactive cells: 0
Amount of memory without usage rights: 0.0 GB
Amount of inactive memory: 0.0 GB
Number of cores without usage rights: 4
Number of inactive cores: 6
Number of cores that must be deactivated (insufficient usage rights): 0
Temporary capacity available: 0 days, 0 hours, 0 minutes
Allocation of Instant Capacity Resources among the nPartitions
--------------------------------------------------------------
Intended Actual
nPar Total Active Active =======Inactive======= Runs
ID Cores Cores Cores Cores Memory Cells iCAP nPar Name
==== ===== ======== ====== ====================== ==== ======================
0 8 5 4 4 0.0 GB 0 Yes Partition 0
1 8 7 6 2 0.0 GB 0 Yes Partition 1 (local)
N/A 0 N/A N/A N/A 0.0 GB 0 N/A Unassigned Cells