Extensible Versatile Editor Reference Manual

Document revision date: 30 March 2001

Extensible Versatile Editor Reference Manual

Contents

Index

SET KEYPAD EDT

Format

SET KEYPAD EDT

Description

The SET KEYPAD EDT command enables the EDT-style keypad, defining the numeric keypad and other keys. There are three ways to keep the EDT keypad for future editing sessions:

Put the SET KEYPAD EDT command in an initialization file (EVE$INIT.EVE).
Use the SAVE EXTENDED EVE command to create a section file that saves your key definitions.
Define the logical name EVE$KEYPAD to EDT before entering the editor.

Table 2-11 lists the keys defined when you use SET KEYPAD EDT, including any EVE default keys still in effect. If you define any keys, when you use DEFINE KEY or LEARN, your definitions override the EVE or EDT definitions.

Table 2-11 EVE Keys Defined with SET KEYPAD EDT
EDT Keys Defined Keys

F10 EXIT

F11 CHANGE DIRECTION

F12 EDT Backspace (Using SET FUNCTION KEYS DECWINDOWS defines F12 as START OF LINE.)

F13 EDT Delete Previous Word

GOLD-F13 RESTORE WORD

F14 CHANGE MODE

HELP HELP KEYPAD (diagram)

GOLD-Help HELP KEYS (list)

DO DO

FIND FIND

GOLD-Find WILDCARD FIND

INSERT HERE INSERT HERE

GOLD-Insert Here RESTORE

REMOVE REMOVE

GOLD-Remove STORE TEXT

SELECT SELECT

GOLD-Select RESET

PREV SCREEN EDT Previous Screen

GOLD-Prev Screen PREVIOUS WINDOW

NEXT SCREEN EDT Next Screen

GOLD-Next Screen NEXT WINDOW

<uparrow symbol> MOVE UP

GOLD-<uparrow symbol> TOP

<- MOVE LEFT

GOLD- <- START OF LINE

<downarrow symbol> MOVE DOWN

GOLD-<downarrow symbol> BOTTOM

-> MOVE RIGHT

GOLD--> END OF LINE

PF1 GOLD (unless you specified a different key with SET GOLD KEY)

PF2 HELP KEYPAD (diagram)

GOLD-PF2 HELP KEYS (list)

PF3 EDT FndNxt

GOLD-PF3 FIND

PF4 EDT Delete Line

GOLD-PF4 RESTORE LINE

KP0 EDT Line

GOLD-KP0 EDT Open Line

KP1 MOVE BY WORD

GOLD-KP1 EDT ChngCase

KP2 EDT End Of Line

GOLD-KP2 EDT Delete EOL

KP3 EDT Character

GOLD-KP3 EDT SpecIns

KP4 FORWARD

GOLD-KP4 BOTTOM

KP5 REVERSE

GOLD-KP5 TOP

KP6 REMOVE

GOLD-KP6 INSERT HERE

KP7 MOVE BY PAGE

GOLD-KP7 DO

KP8 EDT Sect

GOLD-KP8 FILL

KP9 EDT Append

GOLD-KP9 EDT Replace

MINUS EDT Delete Word

GOLD-MINUS RESTORE WORD

COMMA EDT Delete Character

GOLD-COMMA RESTORE CHARACTER

PERIOD SELECT

GOLD-PERIOD RESET

ENTER RETURN

GOLD-ENTER EDT Subs

Ctrl/A CHANGE MODE

Ctrl/B RECALL

Ctrl/E END OF LINE

Ctrl/H or BACKSPACE EDT Backspace

Ctrl/I or TAB TAB

Ctrl/J or LINEFEED EDT Delete Previous Word

Ctrl/K LEARN

Ctrl/L INSERT PAGE BREAK

Ctrl/M or RETURN RETURN

Ctrl/R REMEMBER

Ctrl/U EDT Delete Start Line

Ctrl/V QUOTE

Ctrl/W REFRESH

Ctrl/Z EXIT

DELETE or < X| DELETE

GOLD-1... GOLD-9 REPEAT 1... REPEAT 9

SET KEYPAD EDT does not completely emulate EDT. Table 2-12 explains the important differences between the EVE EDT keypad and the VAX EDT keypad.

Table 2-12 EVE Differences with SET KEYPAD EDT
EVE Keys or Function Difference From VAX EDT

PF1 GOLD. The EDT keypad makes PF1 the GOLD key, overriding any current definition of PF1. However, if you set a different key as GOLD, the EDT keypad uses your GOLD key without redefining PF1. The EDT keypad also defines the EVE default GOLD key sequences, such as GOLD-Find. See the description of the SET GOLD KEY command.

GOLD-PF2 HELP KEYS. Displays a list of all defined keys.

KP1 MOVE BY WORD. Uses slightly different word boundaries from EDT. In EVE, a "word" includes the trailing white space (spaces or tabs).

GOLD-KP7 DO. Enters an EVE command. EVE does not support or emulate EDT line-mode or "nokeypad" commands.

GOLD-KP8 FILL. Reformats the current paragraph, range, or box. If you want the key to fill only a range or box, redefine GOLD-KP8 as FILL RANGE. EVE paragraph boundaries are different (see the description of the FILL command.)

ENTER RETURN. Terminates a command or starts a new line. You can redefine ENTER, but you cannot redefine RETURN or Ctrl/M.

Ctrl/C Usually halts an operation, such as a repeat or global replace. However, if you are using keystroke journaling (instead of buffer-change journaling), Ctrl/C is not recorded in the journal file. After using Ctrl/C, you should immediately exit to save your edits; otherwise, if the system fails, you may not be able to recover your work. This restriction does not apply to buffer-change journaling, which is the EVE default.

Ctrl/K LEARN. Starts a learn sequence so you can bind several keystrokes (commands, text, or both) to a single key.

Ctrl/R REMEMBER. Ends a learn sequence and prompts you to press the key you want to define for it. EVE defines Ctrl/W as REFRESH.

Ctrl/Z EXIT. Ends the editing session and writes out the current buffer and asks whether to write out any other buffers if they were modified. To emulate EDT-style exit-to-line-mode, redefine Ctrl/Z as DO.

F12
Ctrl/H
BACKSPACE EDT Backspace. The command SET FUNCTION KEYS DECWINDOWS overrides the EDT definition, redefining F12 as START OF LINE (the EVE command), which is slightly different from the EDT definition.

Cursor By default EVE uses a free cursor, which you can move anywhere in the buffer regardless of the shape of your text. To enable an EDT-style bound cursor, use SET CURSOR BOUND. The EDT Character key (KP3) uses bound-cursor motion even if the cursor is set to free.

Exiting EXIT creates a new file (or new version of a file) only if you made changes to the buffer and have not yet written it out. QUIT discards your edits, but if you made changes to the buffer, EVE asks you to confirm that you want to quit. Also, on exiting or quitting, if you changed attributes and have not saved them, EVE asks if you want to save the changes.

Input file When you invoke EVE, if you do not specify a file on the command line, EVE creates an empty buffer named MAIN, whereas VAX EDT prompts you to specify a file. Also, you can use wildcards to specify the file, for example, *.TXT.

Journaling By default, EVE uses buffer-change journaling, which creates a journal file for each text buffer. You can recover buffers individually and even from different editing sessions. You can also use keystroke journaling and recovery, similar to that in EDT.

Mode Some commands or keys depend on the mode of the buffer---insert or overstrike, for example, the EDT Delete Character and EDT SpecIns keys.

Paste buffer Commands or keys to copy, cut, and paste text use either the INSERT HERE buffer or the DECwindows clipboard, depending on your setting. See the description of the SET CLIPBOARD command.

Scrolling SET SCROLL MARGINS corresponds to SET CURSOR in VAX EDT, except EVE scroll margins are measured from the top and the bottom, respectively. For example, with a 24-line screen (21-line main window), SET SCROLL MARGINS 5 6 is equivalent to SET CURSOR 5:15 in VAX EDT. The default settings are 0 0 (scrolling begins when you move past the top or bottom of the window).

Searches Searches follow EVE rules for case sensitivity and direction (see help on FIND). Because EVE does not treat RETURN and ENTER differently, as EDT does, search strings cannot contain a carriage return. However, you can use WILDCARD FIND for these searches, or use SET FIND WHITESPACE to enable searching across line breaks.

Selections Commands or keys that work on a standard linear range also work on a box. For example, you can use BOX SELECT and the EDT ChngCase key.

Shift right SHIFT RIGHT and SHIFT LEFT move the window right and left relative to the buffer; the EDT "nokeypad" commands SHL and SHR move the buffer relative to the window. Thus, in EVE, SHIFT RIGHT 8 is equivalent to SHL in EDT and column 9 of your text appears in the leftmost column of the screen.

Startup file By default, EVE tries to execute an initialization file named EVE$INIT.EVE, looking first in your current directory and, if necessary, in SYS$LOGIN. This is roughly equivalent to using an EDTINI.EDT file with VAX EDT.

**Table 2-11 EVE Keys Defined with SET KEYPAD EDT**
EDT Keys	Defined Keys
F10	EXIT
F11	CHANGE DIRECTION
F12	EDT Backspace (Using SET FUNCTION KEYS DECWINDOWS defines F12 as START OF LINE.)
F13	EDT Delete Previous Word
GOLD-F13	RESTORE WORD
F14	CHANGE MODE
HELP	HELP KEYPAD (diagram)
GOLD-Help	HELP KEYS (list)
DO	DO
FIND	FIND
GOLD-Find	WILDCARD FIND
INSERT HERE	INSERT HERE
GOLD-Insert Here	RESTORE
REMOVE	REMOVE
GOLD-Remove	STORE TEXT
SELECT	SELECT
GOLD-Select	RESET
PREV SCREEN	EDT Previous Screen
GOLD-Prev Screen	PREVIOUS WINDOW
NEXT SCREEN	EDT Next Screen
GOLD-Next Screen	NEXT WINDOW
<uparrow symbol>	MOVE UP
GOLD-<uparrow symbol>	TOP
<-	MOVE LEFT
GOLD- <-	START OF LINE
<downarrow symbol>	MOVE DOWN
GOLD-<downarrow symbol>	BOTTOM
->	MOVE RIGHT
GOLD-->	END OF LINE
PF1	GOLD (unless you specified a different key with SET GOLD KEY)
PF2	HELP KEYPAD (diagram)
GOLD-PF2	HELP KEYS (list)
PF3	EDT FndNxt
GOLD-PF3	FIND
PF4	EDT Delete Line
GOLD-PF4	RESTORE LINE
KP0	EDT Line
GOLD-KP0	EDT Open Line
KP1	MOVE BY WORD
GOLD-KP1	EDT ChngCase
KP2	EDT End Of Line
GOLD-KP2	EDT Delete EOL
KP3	EDT Character
GOLD-KP3	EDT SpecIns
KP4	FORWARD
GOLD-KP4	BOTTOM
KP5	REVERSE
GOLD-KP5	TOP
KP6	REMOVE
GOLD-KP6	INSERT HERE
KP7	MOVE BY PAGE
GOLD-KP7	DO
KP8	EDT Sect
GOLD-KP8	FILL
KP9	EDT Append
GOLD-KP9	EDT Replace
MINUS	EDT Delete Word
GOLD-MINUS	RESTORE WORD
COMMA	EDT Delete Character
GOLD-COMMA	RESTORE CHARACTER
PERIOD	SELECT
GOLD-PERIOD	RESET
ENTER	RETURN
GOLD-ENTER	EDT Subs
Ctrl/A	CHANGE MODE
Ctrl/B	RECALL
Ctrl/E	END OF LINE
Ctrl/H or BACKSPACE	EDT Backspace
Ctrl/I or TAB	TAB
Ctrl/J or LINEFEED	EDT Delete Previous Word
Ctrl/K	LEARN
Ctrl/L	INSERT PAGE BREAK
Ctrl/M or RETURN	RETURN
Ctrl/R	REMEMBER
Ctrl/U	EDT Delete Start Line
Ctrl/V	QUOTE
Ctrl/W	REFRESH
Ctrl/Z	EXIT
DELETE or < X\|	DELETE
GOLD-1... GOLD-9	REPEAT 1... REPEAT 9

**Table 2-12 EVE Differences with SET KEYPAD EDT**
EVE Keys or Function	Difference From VAX EDT
PF1	GOLD. The EDT keypad makes PF1 the GOLD key, overriding any current definition of PF1. However, if you set a different key as GOLD, the EDT keypad uses your GOLD key without redefining PF1. The EDT keypad also defines the EVE default GOLD key sequences, such as GOLD-Find. See the description of the SET GOLD KEY command.
GOLD-PF2	HELP KEYS. Displays a list of all defined keys.
KP1	MOVE BY WORD. Uses slightly different word boundaries from EDT. In EVE, a "word" includes the trailing white space (spaces or tabs).
GOLD-KP7	DO. Enters an EVE command. EVE does not support or emulate EDT line-mode or "nokeypad" commands.
GOLD-KP8	FILL. Reformats the current paragraph, range, or box. If you want the key to fill only a range or box, redefine GOLD-KP8 as FILL RANGE. EVE paragraph boundaries are different (see the description of the FILL command.)
ENTER	RETURN. Terminates a command or starts a new line. You can redefine ENTER, but you cannot redefine RETURN or Ctrl/M.
Ctrl/C	Usually halts an operation, such as a repeat or global replace. However, if you are using keystroke journaling (instead of buffer-change journaling), Ctrl/C is not recorded in the journal file. After using Ctrl/C, you should immediately exit to save your edits; otherwise, if the system fails, you may not be able to recover your work. This restriction does not apply to buffer-change journaling, which is the EVE default.
Ctrl/K	LEARN. Starts a learn sequence so you can bind several keystrokes (commands, text, or both) to a single key.
Ctrl/R	REMEMBER. Ends a learn sequence and prompts you to press the key you want to define for it. EVE defines Ctrl/W as REFRESH.
Ctrl/Z	EXIT. Ends the editing session and writes out the current buffer and asks whether to write out any other buffers if they were modified. To emulate EDT-style exit-to-line-mode, redefine Ctrl/Z as DO.
F12 Ctrl/H BACKSPACE	EDT Backspace. The command SET FUNCTION KEYS DECWINDOWS overrides the EDT definition, redefining F12 as START OF LINE (the EVE command), which is slightly different from the EDT definition.
Cursor	By default EVE uses a free cursor, which you can move anywhere in the buffer regardless of the shape of your text. To enable an EDT-style bound cursor, use SET CURSOR BOUND. The EDT Character key (KP3) uses bound-cursor motion even if the cursor is set to free.
Exiting	EXIT creates a new file (or new version of a file) only if you made changes to the buffer and have not yet written it out. QUIT discards your edits, but if you made changes to the buffer, EVE asks you to confirm that you want to quit. Also, on exiting or quitting, if you changed attributes and have not saved them, EVE asks if you want to save the changes.
Input file	When you invoke EVE, if you do not specify a file on the command line, EVE creates an empty buffer named MAIN, whereas VAX EDT prompts you to specify a file. Also, you can use wildcards to specify the file, for example, *.TXT.
Journaling	By default, EVE uses buffer-change journaling, which creates a journal file for each text buffer. You can recover buffers individually and even from different editing sessions. You can also use keystroke journaling and recovery, similar to that in EDT.
Mode	Some commands or keys depend on the mode of the buffer---insert or overstrike, for example, the EDT Delete Character and EDT SpecIns keys.
Paste buffer	Commands or keys to copy, cut, and paste text use either the INSERT HERE buffer or the DECwindows clipboard, depending on your setting. See the description of the SET CLIPBOARD command.
Scrolling	SET SCROLL MARGINS corresponds to SET CURSOR in VAX EDT, except EVE scroll margins are measured from the top and the bottom, respectively. For example, with a 24-line screen (21-line main window), SET SCROLL MARGINS 5 6 is equivalent to SET CURSOR 5:15 in VAX EDT. The default settings are 0 0 (scrolling begins when you move past the top or bottom of the window).
Searches	Searches follow EVE rules for case sensitivity and direction (see help on FIND). Because EVE does not treat RETURN and ENTER differently, as EDT does, search strings cannot contain a carriage return. However, you can use WILDCARD FIND for these searches, or use SET FIND WHITESPACE to enable searching across line breaks.
Selections	Commands or keys that work on a standard linear range also work on a box. For example, you can use BOX SELECT and the EDT ChngCase key.
Shift right	SHIFT RIGHT and SHIFT LEFT move the window right and left relative to the buffer; the EDT "nokeypad" commands SHL and SHR move the buffer relative to the window. Thus, in EVE, SHIFT RIGHT 8 is equivalent to SHL in EDT and column 9 of your text appears in the leftmost column of the screen.
Startup file	By default, EVE tries to execute an initialization file named EVE$INIT.EVE, looking first in your current directory and, if necessary, in SYS$LOGIN. This is roughly equivalent to using an EDTINI.EDT file with VAX EDT.

For information on converting from EDT to EVE, read the online help topic on EDT Conversion.

Related Commands

SET FUNCTION KEYS DECWINDOWS
SET GOLD KEY
SET KEYPAD NOEDT
SET KEYPAD NUMERIC
SET KEYPAD VT100

SET KEYPAD NOEDT

Format

SET KEYPAD NOEDT

Description

The SET KEYPAD NOEDT command disables (undefines) the EDT keypad, restoring the default keypad for the type of terminal you are using. SET KEYPAD NOEDT is the same as SET KEYPAD NUMERIC or SET KEYPAD VT100, depending on the type of terminal you are using.
Keys defined with DEFINE KEY, LEARN, or SET GOLD KEY commands remain defined. However, any learn sequences that use EDT keys will not work properly because the keys are now undefined or defined differently. SET KEYPAD NOEDT cancels the current GOLD key if it was set by enabling the EDT keypad; it does not cancel the GOLD key if you set it with the SET GOLD KEY command.

Related Commands

SET KEYPAD EDT
SET KEYPAD NUMERIC
SET KEYPAD VT100

SET KEYPAD NOWPS

Format

SET KEYPAD NOWPS

Description

The SET KEYPAD NOWPS command disables (undefines) the WPS keypad, restoring the default keypad for the type of terminal you are using. SET KEYPAD NOWPS is the same as SET KEYPAD NUMERIC or SET KEYPAD VT100, depending on the type of terminal you are using.
Keys defined with DEFINE KEY, LEARN, or SET GOLD KEY commands remain defined. However, any learn sequences that use WPS keys will not work properly because the keys are now undefined or defined differently. SET KEYPAD NOWPS cancels the current GOLD key if it was set by enabling the WPS keypad; it does not cancel the GOLD key if you set it with the SET GOLD KEY command.
Disabling the WPS keypad does not restore free cursor motion. To restore free cursor motion, use the SET CURSOR FREE command.

Related Commands

SET KEYPAD NUMERIC
SET KEYPAD VT100
SET KEYPAD WPS

SET KEYPAD NUMERIC

Format

SET KEYPAD NUMERIC

Description

The SET KEYPAD NUMERIC command sets the numeric keypad to the default state, canceling the current keypad setting (EDT, VT100, or WPS). SET KEYPAD NUMERIC is the default except on VT100-series terminals. The command is not valid on VT100-series terminals. Figure 2-1 shows the EVE default keypad.
Using SET KEYPAD NUMERIC to cancel the EDT, WPS, or VT100 keypad does not affect keys defined with DEFINE KEY, LEARN, or SET GOLD KEY commands. However, any learn sequences that use EDT or WPS keys will not work properly because the keys are now undefined or defined differently. SET KEYPAD NUMERIC cancels the current GOLD key if it was set by the EDT or WPS keypad; it does not cancel the GOLD key if you set it with the SET GOLD KEY command.
Figure 2-1 EVE Default Keys

Related Commands

SET KEYPAD EDT
SET KEYPAD VT100
SET KEYPAD WPS

SET KEYPAD VT100

Format

SET KEYPAD VT100

Description

The SET KEYPAD VT100 command enables the VT100-style keypad and cancels the current keypad setting (EDT, NUMERIC, or WPS). This is the default setting on VT100-series terminals. Figure 2-2 shows the EVE default keys on VT100-series terminals.
Using SET KEYPAD VT100 to cancel the EDT, WPS, or VT100 keypad does not affect keys defined with DEFINE KEY, LEARN, or SET GOLD KEY commands. However, any learn sequences that use EDT or WPS keys will not work properly because the keys are now undefined or defined differently. SET KEYPAD VT100 cancels the current GOLD key if it was set by the EDT or WPS keypad.
If you want the VT100 keypad enabled for all or most editing sessions---even if you run EVE on VT300- or VT200-series terminals---do either of the following:

Put the SET KEYPAD VT100 command in an initialization file (EVE$INIT.EVE).
Use the SAVE EXTENDED EVE command to create a section file that saves your key definitions.

Figure 2-2 EVE Default Keys on VT100-Series Terminals

Related Commands

SET KEYPAD EDT
SET KEYPAD NUMERIC
SET KEYPAD WPS

SET KEYPAD WPS

Format

SET KEYPAD WPS

Description

The SET KEYPAD WPS command enables the WPS-style keypad, defines the numeric keypad and other keys, and sets the cursor to bound. There are three ways to keep the WPS keypad for future editing sessions:

Put the SET KEYPAD WPS command in an initialization file (EVE$INIT.EVE).
Use the SAVE EXTENDED EVE command to create a section file that saves your key definitions.
Define the logical name EVE$KEYPAD to WPS before entering the editor.

Table 2-13 lists the keys defined when you use SET KEYPAD WPS, including any EVE default keys still in effect. If you use DEFINE KEY or LEARN to define any keys, your definitions override the EVE or WPS definitions.

Table 2-13 EVE Keys Defined with SET KEYPAD WPS
WPS Keys Defined Keys

F10 EXIT

F11 CHANGE DIRECTION

F12 MOVE BY LINE (Using SET FUNCTION KEYS DECWINDOWS defines F12 as START OF LINE.)

F13 WPS Delete Previous Word

GOLD-F13 WPS Delete Beginning Sentence

F14 CHANGE MODE

HELP HELP KEYPAD (diagram)

GOLD-Help HELP KEYS (list)

DO DO

FIND FIND

GOLD-Find WILDCARD FIND

Insert Here WPS Paste

GOLD-Insert Here RESTORE

REMOVE WPS Cut

GOLD-Remove STORE TEXT

SELECT SELECT

GOLD-Select RESET

PREV SCREEN PREVIOUS SCREEN

GOLD-Prev Screen PREVIOUS WINDOW

NEXT SCREEN NEXT SCREEN

GOLD-Next Screen NEXT WINDOW

<uparrow symbol> MOVE UP

GOLD-<uparrow symbol> TOP

<- MOVE LEFT

GOLD- <- START OF LINE

<downarrow symbol> MOVE DOWN

GOLD-<downarrow symbol> BOTTOM

-> MOVE RIGHT

GOLD--> END OF LINE

PF1 GOLD (unless you specified a different key with SET GOLD KEY)

PF2 MOVE BY PAGE

GOLD-PF2 PAGINATE

PF3 WPS Delete Word

GOLD-PF3 RESTORE

PF4 WPS Delete Character

GOLD-PF4 RESTORE

KP0 WPS Advance

GOLD-KP0 WPS Scroll Advance

KP1 WPS Backup

GOLD-KP1 WPS Scroll Backup

KP2 WPS Line

GOLD-KP2 WPS Line

KP3 WPS Uppercase

GOLD-KP3 WPS Lowercase

KP4 WPS Word

GOLD-KP4 WPS Word

KP5 WPS Paragraph

GOLD-KP5 FILL

KP6 (not defined)

GOLD-KP6 (not defined)

KP7 WPS Sentence

GOLD-KP7 WPS Sentence

KP8 WPS Tab Position

GOLD-KP8 (not defined)

KP9 (not defined)

GOLD-KP9 (not defined)

MINUS WPS Cut

GOLD-MINUS WPS Copy

COMMA WPS Paste

GOLD-COMMA WPS Paste

PERIOD SELECT

GOLD-PERIOD RESET

ENTER WPS Search Right Angle (<>)

GOLD-ENTER WPS Swap

Ctrl/A CHANGE MODE

Ctrl/B RECALL

Ctrl/E END OF LINE

Ctrl/H or BACKSPACE START OF LINE

Ctrl/I or TAB TAB

Ctrl/J or LINEFEED WPS Delete Previous Word

GOLD-Ctrl/J or
GOLD-LINEFEED WPS Delete Beginning Sentence

Ctrl/K LEARN

Ctrl/L INSERT PAGE BREAK

Ctrl/M or RETURN RETURN

Ctrl/R REMEMBER

Ctrl/U ERASE START LINE

Ctrl/V QUOTE

Ctrl/W REFRESH

Ctrl/Z EXIT

DELETE or < X| DELETE

GOLD-DELETE
or GOLD-< X| WPS Delete Start Line

GOLD-1 ... GOLD-9 REPEAT 1 ... REPEAT 9, or to specify a WPS-style alternate paste buffer

GOLD-B BOTTOM

GOLD-C CENTER LINE

GOLD-F EXIT

GOLD-G INCLUDE FILE

GOLD-H HELP KEYPAD (diagram)

GOLD-K QUIT

GOLD-N INSERT PAGE BREAK

GOLD-P WPS Page Marker

GOLD-R WPS Ruler

GOLD-S SPELL

GOLD-T TOP

GOLD-W WRITE FILE

GOLD-` (grave accent) WPS Halt

GOLD-$ SPAWN

GOLD-[ (left bracket) DO

GOLD-: REPLACE

GOLD-; REPLACE

GOLD-' WPS Replace

GOLD-" WPS Replace

GOLD-\ (backslash) WPS Insert Date/Time

GOLD-| WPS Insert Date/Time

GOLD-> (right angle) LEARN

GOLD-, (comma) FIND

GOLD-. (period) WPS Continue Search

GOLD-/ (slash) WPS Continue Search/Select

GOLD-? WPS Continue Search/Select

Previous Next Contents Index

privacy and legal statement

6021PRO_011.HTML

WPS Keys	Defined Keys
F10	EXIT
F11	CHANGE DIRECTION
F12	MOVE BY LINE (Using SET FUNCTION KEYS DECWINDOWS defines F12 as START OF LINE.)
F13	WPS Delete Previous Word
GOLD-F13	WPS Delete Beginning Sentence
F14	CHANGE MODE
HELP	HELP KEYPAD (diagram)
GOLD-Help	HELP KEYS (list)
DO	DO
FIND	FIND
GOLD-Find	WILDCARD FIND
Insert Here	WPS Paste
GOLD-Insert Here	RESTORE
REMOVE	WPS Cut
GOLD-Remove	STORE TEXT
SELECT	SELECT
GOLD-Select	RESET
PREV SCREEN	PREVIOUS SCREEN
GOLD-Prev Screen	PREVIOUS WINDOW
NEXT SCREEN	NEXT SCREEN
GOLD-Next Screen	NEXT WINDOW
<uparrow symbol>	MOVE UP
GOLD-<uparrow symbol>	TOP
<-	MOVE LEFT
GOLD- <-	START OF LINE
<downarrow symbol>	MOVE DOWN
GOLD-<downarrow symbol>	BOTTOM
->	MOVE RIGHT
GOLD-->	END OF LINE
PF1	GOLD (unless you specified a different key with SET GOLD KEY)
PF2	MOVE BY PAGE
GOLD-PF2	PAGINATE
PF3	WPS Delete Word
GOLD-PF3	RESTORE
PF4	WPS Delete Character
GOLD-PF4	RESTORE
KP0	WPS Advance
GOLD-KP0	WPS Scroll Advance
KP1	WPS Backup
GOLD-KP1	WPS Scroll Backup
KP2	WPS Line
GOLD-KP2	WPS Line
KP3	WPS Uppercase
GOLD-KP3	WPS Lowercase
KP4	WPS Word
GOLD-KP4	WPS Word
KP5	WPS Paragraph
GOLD-KP5	FILL
KP6	(not defined)
GOLD-KP6	(not defined)
KP7	WPS Sentence
GOLD-KP7	WPS Sentence
KP8	WPS Tab Position
GOLD-KP8	(not defined)
KP9	(not defined)
GOLD-KP9	(not defined)
MINUS	WPS Cut
GOLD-MINUS	WPS Copy
COMMA	WPS Paste
GOLD-COMMA	WPS Paste
PERIOD	SELECT
GOLD-PERIOD	RESET
ENTER	WPS Search Right Angle (<>)
GOLD-ENTER	WPS Swap
Ctrl/A	CHANGE MODE
Ctrl/B	RECALL
Ctrl/E	END OF LINE
Ctrl/H or BACKSPACE	START OF LINE
Ctrl/I or TAB	TAB
Ctrl/J or LINEFEED	WPS Delete Previous Word
GOLD-Ctrl/J or GOLD-LINEFEED	WPS Delete Beginning Sentence
Ctrl/K	LEARN
Ctrl/L	INSERT PAGE BREAK
Ctrl/M or RETURN	RETURN
Ctrl/R	REMEMBER
Ctrl/U	ERASE START LINE
Ctrl/V	QUOTE
Ctrl/W	REFRESH
Ctrl/Z	EXIT
DELETE or < X\|	DELETE
GOLD-DELETE or GOLD-< X\|	WPS Delete Start Line
GOLD-1 ... GOLD-9	REPEAT 1 ... REPEAT 9, or to specify a WPS-style alternate paste buffer
GOLD-B	BOTTOM
GOLD-C	CENTER LINE
GOLD-F	EXIT
GOLD-G	INCLUDE FILE
GOLD-H	HELP KEYPAD (diagram)
GOLD-K	QUIT
GOLD-N	INSERT PAGE BREAK
GOLD-P	WPS Page Marker
GOLD-R	WPS Ruler
GOLD-S	SPELL
GOLD-T	TOP
GOLD-W	WRITE FILE
GOLD-` (grave accent)	WPS Halt
GOLD-$	SPAWN
GOLD-[ (left bracket)	DO
GOLD-:	REPLACE
GOLD-;	REPLACE
GOLD-'	WPS Replace
GOLD-"	WPS Replace
GOLD-\ (backslash)	WPS Insert Date/Time
GOLD-\|	WPS Insert Date/Time
GOLD-> (right angle)	LEARN
GOLD-, (comma)	FIND
GOLD-. (period)	WPS Continue Search
GOLD-/ (slash)	WPS Continue Search/Select
GOLD-?	WPS Continue Search/Select